[FlexNet] RMNC help

04 Jul 2002 17:05 GMT

Hello Steve,

I have an RMNC node running here. Unfortunately I have no english translati=
on. However I may be able to   answer questions. Let me know what you have =
and what you have achived sofar.

Vy 73

Wolfgang, DK2ZO, Sysop DB0EQ

"STEPHEN C J BUNTING" <[email protected]> schrieb:
> Hi all,
>=20
> I have just inherited an RMNC node. It is out of service at the moment,
> and only have a little information on the system and that is in
> german. Can anyone a) point me towards to full info for the RMNC
> hardware (in Englifh or French... I dont speak German) and b) help me
> get it going... i.e. be willing to exchange emails with me every month
> or so as I try to get the node back on the air. Point b is a lot to ask,
> but without any info I don't know where to start !
>=20
> As far as I know there is only one RMNC node active in the UK at the
> moment and I can't get hold of the sysop so I am turning to you guys
> (and gals)
> 73
> Steve
> M0BPQ
> -------------------------------------------------------------------
> Steve Bunting
> Neural Damage and Repair,=09=09Tel 0207 848 6268
> Neuroscience Research Centre,=09=09
> King's College London
> Hodgkin Building=09=09=[email protected]
> Guys Campus
> London Bridge
> London
> SE1 1UL
> --------------------------------------------------------------------
>=20
>=20
> _______________________________________________
> FlexNet mailing list
> [email protected]
> http://mailman.qth.net/mailman/listinfo/flexnet
>=20