[Fists] FISTS Petition has an RM number
K3PID
[email protected]
Wed, 8 Oct 2003 15:43:25 -0500
DITTO! And get 10 others to file also!!!
K3PID
----- Original Message -----=20
From: Bob N0UF=20
To: [email protected]=20
Sent: Wednesday, October 08, 2003 9:49 AM
Subject: Re: [Fists] FISTS Petition has an RM number
Nancy is Right! It's very easy.
File your comment TODAY!!!!
73
Bob N0UF
FIST # 6769
----- Original Message -----=20
From: "Nancy WZ8C" <[email protected]>
To: <[email protected]>
Sent: Tuesday, October 07, 2003 9:02 PM
Subject: [Fists] FISTS Petition has an RM number
> Hi FISTS,
>
> Our petition has an RM number!!
>
> It is RM-10811.
>
> We have 30 days to post comments about it.
>
> I talked to William Cross, of the FCC, today. He said (in a =
nutshell)
that
> since all the petitions are of different viewpoints and have =
different
> points mentioned in them, after all the comment periods are over, he
will go
> through all the comments and choose the points from all the filed
peitions
> that most of the people wanted. He will then bundle them into one
petition.
>
> We need to be sure that the FISTS petition is the petition that gets
the
> most "I AGREE" votes. He said that for this comment period it is NOT
> necessary to write lengthy opinions, but just say "I agree with the
FISTS
> petition" or "I agree with the FISTS petition except for the part
about the
> 12 WPM increase" , etc.
>
> It really is very simple, once you find the page to fill in your
comments -
> that's the hardest part! This link should take you right to it.
> http://gullfoss2.fcc.gov/prod/ecfs/upload_v2.cgi
>
> The proceeding number has to be exactly RM-10811 with a captial RM =
and
the
> hyphen. That goes in box 1. Put your name in box 3, and your =
mailing
> address in boxse 7, 8, and 9.
>
> Scroll down to the bottom of the page where it says "Send a brief
comment to
> the FCC (typed in)" and type in your brief comment. Then click Send
Comment
> and that will take you to a page that verifies that your comment has
been
> received.
>
> YOU DON'T HAVE TO BE A HAM TO FILE A COMMENT!! Your spouse, kids
(over 18,
> I assume) and friends at work, neighbors, ANYONE who wants to help =
can
file
> a comment. NUMBERS are very important at this stage. We have 30 days
to show
> them that CODE MATTERS and We are Proud to Be KNOW CODE Hams!
>
> After 30 days, we have a 15 day rebuttal period, then that's IT.
>
> Mr. Cross told me that the ARRL says that 70% of the hams don't use
Morse
> code. I don't know where they got that figure from, but it just goes
to show
> that we need to bombard the ARRL with emails and cards, too.
>
> In the latest KN, there are postcards for you to cut out and mail in
to the
> FCC and the ARRL. Fill in the RM number on the FCC card before you
mail it,
> please! To mail the ARRL postcard, you will have to cut about an
inch past
> the point the dotted lines end, into the front cover to make it =
large
enough
> to mail.
>
> The third postcard, which is blank (my intention was that you send =
it
> directly to your ARRL director) is too small to mail as a postcard. =
It
needs
> to be put into an envelope or taped to a 3x5 card. Sorry about =
thatt!
But,
> the important ones are the one to the FCC and the one to ARRL HQ.
>
> If someone you know wants to file a comment to the FCC but doesn't
have
> internet capability, the postal address is
> Federal Communications Commission
> 445 12th Street, SW
> Washington, DC 20554
>
> LET THEM HEAR FROM US!! Start a petition at your local club!! We =
will
not
> just sit by quietly and let them dumb us down any further!!
>
> Please file your comments; it's fast, it's easy and it's crucial. .
>
> Thank you,
> 73 88
> Nancy WZ8C
> PS: Contact me at [email protected], DO NOT reply to this address, it is
an
> automated sending list
>
>
>
> _______________________________________________
> Fists mailing list
> [email protected]
> http://mailman.qth.net/mailman/listinfo/fists
_______________________________________________
Fists mailing list
[email protected]
http://mailman.qth.net/mailman/listinfo/fists
--- StripMime Report -- processed MIME parts ---
multipart/alternative
text/plain (text body -- kept)
text/html
The reason this message is shown is because the post was in HTML
or had an attachment. Attachments are not allowed. To learn how
to post in Plain-Text go to: http://www.expita.com/nomime.html ---