[FARC] New repeater
Mike Myers
netnutmike at gmail.com
Thu Jun 16 11:41:18 EDT 2016
Hi everyone,
I have a few notes for everyone on the new repeater. The repeater is setup in auto / auto mode which means, if it receives a traditional FM signal it will repeat that same signal back out and if it receives a Fusion (C4FM) signal it repeat that back out as well.
That means that you could hear on the FM side what sounds like noise but it is digital data. To avoid hearing the noise when it is digital if you setup a receive tone in your Tone Squelch settings the same as the transmit tone (100.0) you will only hear the FM repeater. The tone is not transmitted for digital, only analog. If you set the receive tone, I do not think you will get the CW ID that is transmitted every 10 minutes because that is sent without a tone.
I have temporarily setup my Wires-X node to work with the repeater and it by default connects to the America Link room. But feel free to change rooms and experiment with the Wires-X.
Mike Myers
netnutmike at gmail.com
K3DO
> On Jun 16, 2016, at 11:04 AM, Brian via FARC <farc at mailman.qth.net> wrote:
>
> The FARC 70cm has been upgraded with the installation of a Yaesu Fusion repeater. Thanks to Mike Myers K3DO for getting the repeater setup and installed. Key up and check out the new repeater.
>
> 73
> Brian AB3RW
>
> Sent from my iPad
> ______________________________________________________________
> FARC mailing list
> Home: http://mailman.qth.net/mailman/listinfo/farc
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:FARC at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
More information about the FARC
mailing list