[FADCA] HD Pbms

[Chuck Hast]

On 7/15/06, k4gbb at earthlink.net <k4gbb at earthlink.net> wrote:
>
>
> -----Original Message-----
> >From: Chuck Hast <wchast at gmail.com>
> >Sent: Jul 15, 2006 8:36 PM
> >To: k4gbb at earthlink.net, Florida Amateur Digital Communication Association <fadca at mailman.qth.net>
> >Subject: Re: [FADCA] HD Pbms
> >
> >Sounds like you are having fun. I was looking at the fpac files to try to figure
> >out how to add the neighbor address to the links list, that would make it a
> >lot easier to do a node hop to the next node if for some reason the routng
> >was bad but the two devices do see and can talk to each other. Right now
> >you have to guess the address or try to guess what the node call is (we
> >pretty much have it stablilzed here in the USA and France, but I see that
> >it does get changed in other places.
> >
> >The HD thing is always scary... Hope you can get it all under control so
> >that you are no longer fighting it.
> >
> >--
> >Chuck Hast  -- KP4DJT --
>
> I was looking at that myself. I have a local node that don't broadcast.
> I tried to add it to neighbor_nodes, but you can't writer to the file and it is a voitile file.
>

Are you talking about the netrom nodes? You can put fixed routes in the
the routing using the nrparms command. You would put it in your ax25
startup file after you get netrom going.

What I want to do is add a 4th listing in the Link command which shows the
neighbor switches, port and the port description (useless I feel) I
would like to
add the X.121 address of that neighbor switch so you can see it for whatever
reference you need (some times it comes in handy to have the address in
particular if you are trying to connect to the switch and it is either
a fpac dos
or ROSE switch.


-- 
Chuck Hast  -- KP4DJT --
To paraphrase my flight instructor;
"the only dumb question is the one you DID NOT ask resulting in my going
out and having to identify your bits and pieces in the midst of torn
and twisted metal."