[FADCA] Telpac Nodes and Wilma

[Chuck Hast]

On 10/23/05, Evans F. Mitchell KD4EFM / AFA2TH FL <kd4efm at kd4efm.org> wrote:
> That's the music I was awaiting to hear from you!
> set it up for what it needs as a switch for Bartow (863533)
> Linux would be my choice also (play with IRLP too much now)
> AND there might be a chance I can get another TELPAC setup
> due to having Wireless AND Fiber access to the net soon (this is also
> in the works at this time)
>
OK, I will look at it and see how big the disk is, if I can dual boot, I will
leave the DOS fpac on there and set it up so that it will run both.

I still have some other stuff ahead of all of this, and of course if
the contract
that I am persuing goes through I will be outta here for a while, but mean
while as soon as I get the dock done, I will set to work on it.


> When ever you have linux loaded on it and running, we'll
> be ready for it in a about 90 days.. hardline and stuff are for the new
> budget
> period and that has been worked into it.

OK, it will have the switch and the TelPac Node app on it also, just as I have
done here on my site it will have the telpac alias and the -10 call, a connect
to telpac or the -10 call on the appropriate port(s) will return a immediate
connect to the distant winlink server. A connect to the app over the network
will get you the same thing.
>
> The setup would be one lan and one backbone (both omni's above the 170'
> mark)
> Just need a path study for Bartow to Arcadia and from bartow to Tampa /
> Orlando
>

Can we get separate trunk freqs going out of there in order to avoid the hidden
terminal issues?
--
Chuck Hast
To paraphrase my flight instructor;
"the only dumb question is the one you DID NOT ask resulting in my going
out and having to identify your bits and pieces in the midst of torn
and twisted metal."