[FADCA] Port 0 gone Port 1 blinky/blinky

[bud thompson]

HI, Charlie

I just got back in here (1540 E)

Looks like you rebooted - as I had to log in KNOPIX.

FPAC now has ports 1 and 9 port 0 gone

calibrate 1

results in talking to the third TNC (the right one - top of the two on the 
pci) but the PTT blinks on/off on/off  rather than stay on steady.    Return 
stops the blinking and PTT is off.

what next?

bud


----- Original Message ----- 
From: "Charles S Schuman" <k4gbb at earthlink.net>
To: "FADCA - News Reflecter" <fadca at mailman.qth.net>
Sent: Wednesday, November 23, 2005 13:25
Subject: [FADCA] Serial PCI cards w/ Linux


>I think I got this serial PCI card untangled.
> They get assigned their /dev/ttyS numbers AFTER
> the four devices (0 to 3) which MIGHT be on the motherboard.
>
> In Bud's case they are assigned /dev/ttyS4 & 5.
> I was able to attach one to port 1 and run calibrate.
> The system shows that data was sent to the device.
> I couldn't varify this cause I can't see the TNC from here.
>
> I tried to do the same w/ Linuxlab, but the box won't boot
> with my PCI card installed. Even the paranoids are aginst ME!
>
> <<Charlie>>
>    k4gbb
>
> _______________________________________________
> FADCA mailing list
> FADCA at mailman.qth.net
> http://mailman.qth.net/mailman/listinfo/fadca
>
>
>
>