[FADCA] Serial PCI cards w/ Linux

[bud thompson]

----- Original Message ----- 
From: "Charles S Schuman" <k4gbb at earthlink.net>
To: "FADCA - News Reflecter" <fadca at mailman.qth.net>
Sent: Wednesday, November 23, 2005 13:25
Subject: [FADCA] Serial PCI cards w/ Linux


>I think I got this serial PCI card untangled.
> They get assigned their /dev/ttyS numbers AFTER
> the four devices (0 to 3) which MIGHT be on the motherboard.
> 
> In Bud's case they are assigned /dev/ttyS4 & 5.
> I was able to attach one to port 1 and run calibrate.
> The system shows that data was sent to the device.
> I couldn't varify this cause I can't see the TNC from here.
> 
> I tried to do the same w/ Linuxlab, but the box won't boot
> with my PCI card installed. Even the paranoids are aginst ME!
> 
> <<Charlie>>
>    k4gbb
> 

* * *
Deltona
Wednesday 1350E

It works . . .
The switch now has ports 0, 1, 9

Calibrate 0 works on the MB port
Calibrate 1 works on the bottom port of the pci card

Ready for the next one.

bud