[FADCA] W4AKH and F6BVP linked

[Bill Sinbine]

At 05:02 PM 6/16/2005, Bernard Pidoux wrote:
>Bill Sinbine a écrit :
>>At 09:57 AM 6/16/2005, Bernard Pidoux wrote:
>>
>>>Hi Chuck, Bill,
>>>
>>>Our nodes are now synchronized.
>>>Congratulation.
>>>This morning, I observed that F6BVP-11 was connected to W4AKH-11 while 
>>>KP4DJT-11 was not for at least one hour according to STA1.
>>>Was this due to n4xeo IP address change ?
>>
>>I have to re dial every12 hours and it is normally around 6 and 6 our 
>>time Bernard but I noticed Chucks site wasn't there before I had to re 
>>dial. I did connect to you with no problems before heading out to work.
>>
>>>Here at F6BVP the script updates the address every hour.
>>>
>>>Concerning the declaration of routes in FPAC.CONF, I learned from Lucien 
>>>F1TE sysop of F5KBW, a simpler method when there is only one node for
>>>a full DNIC.
>>>
>>>For W4AKH you could use :
>>>
>>>Routes
>>>...........
>>>  DNIC = 0
>>>  2080 = F6BVP
>>>End
>>
>>That's a good deal if you only have to have one connect to a dnic....
>>Bernard I see a lot of data going between us at this time. I assume that 
>>it is all WP data since we just started the link. Is that what it is?
>>OR are you in here live doing stuff??
>
>Yes I am presently at home.
>You are probably right about WP traffic.
>I modified my fpac.conf according to Chuck in order to give more 
>information available on line.

I figured that is what it was. I'm sure we will catch everything up if it 
isn't done by now.

>I also introduced some more debug message via syslog() into fpad and ax25ipd.
>But I am not ready for deep code modifications specially on FPAC for 
>Jean-Paul did not put much comments to explain what he was doing or 
>intended to, Too bad.

I'm sure we will find someone good at code that can get in there and fix 
things up for us as needed!

>However, with time, and the help of syslog messages one can learn a bit 
>more about the program.
>Its sad that Chuck and others have difficulties to compile the FPAC 325 
>sources. Perhaps you could see if the compiled code I put on my pages can 
>run with your Linux. If we could use this procedure for delivering the 
>executable files.
>
>I remove fadca destination on my message headers for they are not accepted 
>by the mailman.

Not a problem. I can add you to the lists and they are low volume or I can 
just add your comments like I'm doing now by sending it to the lists. This 
way everyone can be involved that isn't on all the lists...

It looks like our links are solid. If you would want to try a little bbs 
forwarding send me your info and I'll set you up and we can get going with 
it and see how it goes!!!

73, Bill N4XEO

E- Mail mailto: n4xeo at bellsouth.net
home page:        http://www.qsl.net/n4xeo
Fort Pierce arc:  http://www.qsl.net/w4akh
F.A.D.C.A.:        http://www.fadca.org
FPAC:               http://www.qsl.net/fpac