[FADCA] Status of Dual Speak Mitrek for Melbourne LAN

[bud thompson]

----- Original Message ----- 
From: "Doug Ferrell, KD4MOJ" <kd4moj at kd4moj.org>
<snip>
> -----Original Message-----
<snip>
> Just wanted to throw in something here.... the Yaesu FT-2600 and a
> Kantronics KPC-9612 will allow both 1200 and 9600 use at the same time. 
> you
> can go in at either baud rate and out the other rate. it takes making up a
> cable but the nice thing about the 2600 is that it has a RS-232 built in 
> the
> radio. Unfortunately it's been discontinued but they do show up on ebay.
>
>
> ...DOUG
> kd4moj
>
> \
Hi, Doug.

Thanks for the info on the FT-2600.  We have had some experience with the 
KPC9612 and the ONERADIO command.  In fact, the current project for a dual 
speak Mitreks using a two TNCs is because FPAC DOS won't support the KPC9612 
(or at least I've not yet located the holy grail to make it work.)

When we install the dual speak Mitrek at Melborune LAN it will have a PK96 
and a Tiny 2 (1200b).  At that time KN6KB and KC4PX will have dual speak 
Mitreks that we have configured for their KPC9612s.

bud

> _______________________________________________
> FADCA mailing list
> FADCA at mailman.qth.net
> http://mailman.qth.net/mailman/listinfo/fadca
>