[FADCA] Florida Telpac Nodes - SSIDs

[John H. Green]

Changing the ssid of Telpac to -10 does bring up a conflict with FPAC 
switches.. The console id has been -10 since we started with fpac. If 
Fpac and Telpac use the same call (Arcadia does for sure) this will 
create havoc if the console is used with Telpac on the same Frequency. 
Fortunately, I don't think there are many conflicts out there - maybe 
N0IA, W4MIN and possibly N4XEO..
    I recommend that we change the FPAC console ssid to -7, this way 
fpac will use -0 to -9 for all it stuff and leave -10 + for other 
uses..  Except for those sites that have a conflict I don't think we 
need to rush into making any changes.. We will need to make changes to 
the quick connects as folks change over so for those folks I send files 
to let me know of any changes..

    Doug - do you want me to make the changes and send files ?  If you 
look for the console ssid it is in the cfg file near the top..

73  John

John H. Green wrote:

> This really has nothing to do with FPAC other than changing the 
> destination call-ssid on the quick connect.  Thus the line at the 
> bottom of the Arcadia cfg file changes "alias=6;W4MIN-6,863244,R"  to 
> "alias=6;W4MIN-10,863244,R"
> Brownsville will need a similar change.
>    As bud indicated you will need to change the Telpac call ssid and 
> go to the Winlink site to make the change.. When I did this Winlink 
> did not take the change till I sent Rick an email -  something about 
> permissions to make the change on the server, hopefully they have this 
> straightened out now..
>
> 73  John
>
> Chuck Hast wrote:
>
>> On Wed, 23 Feb 2005 11:39:14 -0500, Doug Christ <kn4yt at yahoo.com> wrote:
>>  
>>
>>> I do not believe I can change my SID to a -10 as it is attached to a 
>>> port on
>>> my FPAC switch. I can only assume the same for other similar setups.
>>>
>>> As of right now, mine is W4MIN-6, which is a quick connect in FPAC DOS.
>>>
>>>   
>>
>>
>> This is one of the limitations of FPAC DOS, only the first 6 SSID's are
>> available for such things. With FPAC Linux that limitation goes away,
>> also you can have quick connects to other ID's on the linux box.
>>
>>  
>>
>
> _______________________________________________
> FADCA mailing list
> FADCA at mailman.qth.net
> http://mailman.qth.net/mailman/listinfo/fadca
>
>