[FADCA] LINUX White Pages / QRZ Stuff

[oderr at bellsouth.net]

Thanks, Bill. I think with what you sent and the information Chuck has sent, I know now more of what I need to do.  I asked Chuck another question regarding the wires needed.

How do you put a port on FPAC in Kiss Mode? I don't remember seeing that in the FPAC documentation.  I am not sure what the Telpac Node software will do when it tries to set a TNC to Kiss and there is no TNC connected to it. I need clarification on that issue.

There just seems to be something missing in what you and Chuck have sent me.

Russ

> 
> From: Bill Sinbine <n4xeo at bellsouth.net>
> Date: 2004/09/16 Thu PM 08:49:08 EDT
> To: Florida Amateur Digital Communication Association <fadca at mailman.qth.net>
> Subject: Re: Re: [FADCA] LINUX White Pages / QRZ Stuff
> 
> At 09:33 AM 9/16/2004, you wrote:
> >Please send me the wiring diagram for the wired connection to the FPAC 
> >switch. I am working on doing it through two TNCs at their radio ports. If 
> >there is an easier way without the TNCs, I would like to use it. Also, I 
> >was going to put an Alias in the FPAC programming to allow a connection 
> >directly to the Telpac Node by issuing a connect to the Telpac Node call.
> >
> >Russ
> 
> All you have to do is use a null modem cable between the 2 com ports and 
> set both ends up for kiss.
> You don't have to use tnc's at all. This is how I have 2 ports on my switch 
> set up Russ. One for the bbs and the other for the telpac port.
> 
> 
> 73, Bill N4XEO
> 
> E- Mail mailto: n4xeo at bellsouth.net
> home page:        http://www.qsl.net/n4xeo
> Fort Pierce arc:  http://www.qsl.net/w4akh
> F.A.D.C.A.:        http://www.fadca.org
> FPAC:               http://www.qsl.net/fpac
> 
> 
> 
> _______________________________________________
> FADCA mailing list
> FADCA at mailman.qth.net
> http://mailman.qth.net/mailman/listinfo/fadca
>