[FADCA] DNIC setup

[Russell Oder]

I sent Chuck to .cnf rose files of neighboring switches with the DNIC 0
routing.  We talked on the phone and he is charging ahead.

Russ

----- Original Message ----- 
From: "Chuck Hast" <wchast at gmail.com>
To: "FADCA" <fadca at mailman.qth.net>; <fpac at f6fbb.org>
Sent: Friday, November 19, 2004 5:40 PM
Subject: [FADCA] DNIC setup


> Do any of you remember how to add another DNIC to the routing tables in
> DOS FPAC (it is the same as ROSE and i did it years ago when we did the
> network in Costa Rica ) I was trying to set up the routing tables in the
switch
> down town so connections to DNIC 2080 would be routed to my switch
> and from there of course on over the France (DNIC 2080). I now have the
> axip link to Paris up and running with the help of Lucien and Bernard,
> I am linked presently to Bernard's switch. I am working on getting to
> Lucien's switch.
> Once I can get the DNIC routing remembered (Russ, do you have old
> routing files for when we had the 10m link between CR and US?)
> I will get the switch down town set up, then of course each switch along
> the route will have to aim the 2080 DNIC at Tamp. I was at the switch
> site trying to remember how to set it up but kept on fubar'ing it. It has
> been WAY too long since I did the DNIC piece.
>
> It is a shame because we should be using the DNIC to route certain
> specialty traffic.  More on that in another e-mail. I just need to
remember
> how to route the DNIC's in ROSE/FPAC DOS...
>
> -- 
> Chuck Hast
> To paraphrase my flight instructor;
> "the only dumb question is the one you DID NOT ask resulting in my going
> out and having to identify your bits and pieces in the midst of torn
> and twisted metal."
> _______________________________________________
> FADCA mailing list
> FADCA at mailman.qth.net
> http://mailman.qth.net/mailman/listinfo/fadca