[FADCA] Bartow Node

[wchast at utilpart.com]

Evans Mitchell kd4efm / afa2th fl wrote:
> BTW Chuck, I have two uhf Maxon's that I can probably get programmed
> for the backbone part, just need to find out some spec's and see if
> they will tune down to there and then get them programmed and ready
> to test. 
> 
> model: sm-4450sc
> UHF 35 watt 16 channel
> 
> Evans
> ----- Original Message -----
> From: "Evans Mitchell kd4efm / afa2th fl" <kd4efm at kd4efm.org>
> To: "Florida Amateur Digital Communication Association"
> <fadca at mailman.qth.net> 
> Sent: Monday, May 10, 2004 15:38
> Subject: Re: [FADCA] Bartow Node
> 
> 
> Yes if you do not mind coming over to see what a county comm. shop is
> doing.... 
> I may have access to a few items at that time....
> my schedule would probably be Tuesday the 18th to be the soonest
> possible time 

Hey! I used to have a country comm shop so do not cast dought on it!
Besides we got the jobs done that the city ones said could not be done,
strange what you can do with bailing wire and barbed wire!! Especially
when there is nothing else around to use!

We will have to see what is involved in getting 9k6 goo on those maxons.
Some of them do not exactly like the low freq component of 9k6 (22.5Hz)
but there are even ways around that, also there is a little issue of lock
up time too...


Chuck Hast
-------------------------------------------------------------------------
To paraphrase my flight instructor;
"the only dumb question is the one you DID NOT ask resulting in my going
out and having to identify your bits and pieces in the midst of torn
and twisted metal."


*****************************************************************
This e-mail and any files transmitted with it are confidential and are
intended solely for the use of the individual or entity to whom it is
addressed. If you have received this transmission in error, please notify
the sender immediately and destroy any hard copies you may have printed and
remove all copies of the e-mail from your hard drive. Opinions, conclusions
and other information in this message that do not relate to the official
business of Utility Partners, Inc shall be understood as neither given nor
endorsed by it.

Visit us on the web at http://www.utilpart.com 
*****************************************************************