[FADCA] Manuals

Thu, 18 Mar 2004 16:40:17 -0500

[email protected] wrote:
> HI,
> I NEED THE MANUAL AND SERVICE MANUAL FOR THE KAM3+.
Is it the KAM3+  or the KPC3+??

> DO YOU HAVE THEM TO POST?
> I CHECKED FOR SEVERAL HOURS LAST NIGHT AND COULD NOT FIND EITHER ON
> THE WEB.  ALMOST A THOUSAND SITES.  NOT GOOD FOR THE EYES!
> ALL OF THE MANUALS FOR THE HAM EQUIPMENT WAS TOSSED OUT AT THE EOC AND
> THE KAM IS NOT FUNCTIONING WELL.
> THANKS.
> 73,

Check out the gear, I see a ton of sites when I do a google on kpc3+
kam3+ returns zip...

Chuck Hast
-------------------------------------------------------------------------
To paraphrase my flight instructor;
"the only dumb question is the one you DID NOT ask resulting in my going
out and having to identify your bits and pieces in the midst of torn
and twisted metal."

*****************************************************************
This e-mail and any files transmitted with it are confidential and are
intended solely for the use of the individual or entity to whom it is
addressed. If you have received this transmission in error, please notify
the sender immediately and destroy any hard copies you may have printed and
remove all copies of the e-mail from your hard drive. Opinions, conclusions
and other information in this message that do not relate to the official
business of Utility Partners, Inc shall be understood as neither given nor
endorsed by it.

Visit us on the web at http://www.utilpart.com 
*****************************************************************