[FADCA] stumped

[Bill Sinbine]

At 02:01 PM 1/29/2004 -0500, you wrote:
>Hi guys,
>
>I'm not sure who can help but I am stumped with interfacing the FPAC switch
>with my MSYS box.
>
>This is what I have done. Using a null modem cable, I have established a
>serial cable link between the two computers. I have installed a serial port
>analyzer on the line and it clearly shows that all lines are active plus you
>can see the TD and RD lines blink when information is passing.  MSYS sees
>the FPAC connect request and responds. FPAC does not see what MSYS is
>sending. I even went as far as installing a TNC on the serial cable to make
>sure that MSYS was talking to the port correctly. Is it because that MSYS
>uses simple KISS instead of the BPQKISS  or whatever FPAC uses that I am
>having these problems?
>
>Any suggestions are welcome.
>
>Doug/KN4YT

Doug
I'll send you a copy of my fpac files so you can see how the port is set 
up. For this kiss is kiss so that shouldn't matter. Just remind me if I 
don't send it to you in a few days...

73, Bill N4XEO