[FADCA] New BBS program wants

Sat, 10 Jan 2004 21:02:23 -0500

If it can talk KISS, then you link it directly to a 
switch give it a dedicated address and now you have
a nice stack of switch and bbs in two machines that
can talk at a nice rate without having to have things
like bpq or other stuff between the BBS and the serial
port.

I used to run AA4RE, it needed something like BPQ
between it and the serial port in order to talk KISS.

> -----Original Message-----
> From: j daughtry [mailto:[email protected]]
> Sent: Saturday, January 10, 2004 11:48 AM
> To: [email protected]
> Subject: Re: [FADCA] New BBS program wants
> 
> 
> could  it possibly add support for aea tncs in kiss mode and 
> support for
> kantronics  kp-3s  there are hundreds of these in use and to make the
> program used wide spread it need to be  simple to install 
> easy to run ,not
> crash
> and support the hardware that's all ready in use .
>  I personally don't like to run another program to load my 
> tnc's in my world
> I was told to keep it simple as possible.
> john----- Original Message -----
> From: "bud thompson" <[email protected]>
> To: <[email protected]>
> Sent: Saturday, January 10, 2004 5:34 AM
> Subject: Re: [FADCA] New BBS program wants
> 
> 
> > Comments...
> >
> > The PacTOR Level mode is a function of the Data Controller, not the
> > software.  At this time the SCS PTC Data controllers are 
> the only ones
> that
> > use PacTOR 2 or 3.  Therefore to use PacTOR 2, 3 the series 
> of SCS PTS
> > controllers needs to be supported.
> >
> > Any dual port TNC (KAM, KPC9612, PTC, DRSI, etc,) should be 
> supported for
> > both ports to be used independently.(DRSI boards are ISA)
> >
> > bud N0IA
> >
> >
> >
> > _______________________________________________
> > FADCA mailing list
> > [email protected]
> > http://mailman.qth.net/mailman/listinfo/fadca
> >
> 
> _______________________________________________
> FADCA mailing list
> [email protected]
> http://mailman.qth.net/mailman/listinfo/fadca
> 

*****************************************************************
This e-mail and any files transmitted with it are confidential and are
intended solely for the use of the individual or entity to whom it is
addressed. If you have received this transmission in error, please notify
the sender immediately and destroy any hard copies you may have printed and
remove all copies of the e-mail from your hard drive. Opinions, conclusions
and other information in this message that do not relate to the official
business of Utility Partners, Inc shall be understood as neither given nor
endorsed by it.

Visit us on the web at http://www.utilpart.com 
*****************************************************************