[FADCA] FPAC hardware

Tue, 16 Sep 2003 21:51:56 -0400

Charlie, don't hesitate to ask for help. While I have to have someone hold
my hand, it sure helps to have someone look at your cfg files as they are
different than what we think of in ROSE, boy, the same call on all ports
through me for a loop. Still not sure mine are working right. Had to take
them down due to house reconstruction but Bud has me stirred up again and
maybe now I can get the "domestic" stuff out of the way in the garage. With
cooler weather, I might even get some work done. Ha Ha.

But, seriously, take Bud up on his offer.

Russ

----- Original Message ----- 
From: "Bill Sinbine" <[email protected]>
To: <[email protected]>
Sent: Tuesday, September 16, 2003 9:01 PM
Subject: Re: [FADCA] FPAC hardware

> At 04:21 PM 9/16/2003 -0400, you wrote:
> >Deltona
> >Tuesday Sept 16 1615E
> >
> >Not much time- damn wish I had more...
> >
> >I assume that FPAC actually starts up.
> >
> >What TNCs are you using?
> >What are the comport addresses and IRQs?
> >
> >Send me your nnnnnn.cfg file as a text file attachment in an e-mail.
> >
> >Do you have BPQKISS EPROMs?
> >
> >1. The TNCs must have BPQKISS EPROMs in place of the AX.25 EPROM.  We've
> >been getting those from John WB4MOZ but he is out of state for another
few
> >weeks. I have a couple I can send you if you need them.
> >2.  The setkiss lines just set some parameters that FPAC doesn't set...
I'll
> >ferret those out for you soon.
> >
> >When I get your cfg file I'll work on it and maybe we can have a phone
call.
> >
> >Sorry to be so busy.
> >
> >bud N0IA
> >
> >
>
> Hi All
>
> You do NOT have to use a kiss chip. The advantage of a kiss chip is so you
> don't have to worry about it coming out of kiss at a remote site. I've run
> my 9k6 port from day one with it in kiss only....
>
> It sounds like you just need to go through the fpac.cfg file and make sure
> you have all the parms set properly.
>
> 73, Bill N4XEO
>
>
>
>
>
> _______________________________________________
> FADCA mailing list
> [email protected]
> http://mailman.qth.net/mailman/listinfo/fadca
>