[FADCA] Thanks to everyone that helped out today

[fadca@mailman.qth.net]

Evening all:

Bud, Charlie, Bill and Andy, thanks for coming out and helping fine tune =
the equipment today.   Thanks also to Rick for his input from the field. =
  Since it seems that I am the first one to update everyone else =
concerned, here is the news.   The Melbourne FPAC switch seems to be =
running about 95%.   There still seems to be a glitch between Melbourne =
and Vero on 440.   When we left Trinity Towers today we were not sure if =
the glitch was in the Melbourne TNC or if it might be in the Vero site.  =
 More testing will be done in the next 2 weeks and if the problem is in =
the Melbourne TNC Bud and I will change it out.   Other then that a =
little tender loving care and some tweaking got everything up to snuff.  =
 We found that the used polyphazers that I had installed for the future =
Melbourne to Bithlo 440 link and the jumper between it and equipment =
were both bad and replaced them.   We also came up with a plan for the =
grounding on the polyphazers as well.   Andy set up his service monitor =
and did a wide spectrum scan for any possible interference and did not =
seem to find anything that should be of any concern.   This evening I =
have made up new jumper to install between the polyphazers and the =
equipment and will get them installed this week.   I will advise =
everyone the day before I go up to replace the jumpers so that if =
someone notices that the system is down for a short time they should =
know why.   I will also try to work on the grounding for the polyphazers =
this week.=20

73' for now;
Eric KD4DJW   =20


--- StripMime Report -- processed MIME parts ---
multipart/alternative
  text/plain (text body -- kept)
  text/html
The reason this message is shown is because the post was in HTML
or had an attachment.  Attachments are not allowed.  To learn how
to post in Plain-Text go to: http://www.expita.com/nomime.html  ---