[FADCA] TelPac log fo n0io

Sun, 12 Jan 2003 12:39:59 -0500

If you are doing a pure digi or going through FPAC the
call you entered the network with will be the one you
exit with, if you are going in on netrom derivatives
you will find your ssid is changed. 

> -----Original Message-----
> From: Rick Muething [mailto:[email protected]]
> Sent: Sunday, January 12, 2003 07:59 AM
> To: [email protected]
> Subject: RE: [FADCA] TelPac log fo n0io
> 
> 
> All,
> The problem with this is since bud is a PMBO (N0IA) and a 
> user (N0IA-1) he
> can only connect as a user currently.  Sometimes the digi 
> paths strip off or
> change the ssid.
> 
> Rick
> 
> 
> -----Original Message-----
> From: [email protected] 
> [mailto:[email protected]]On
> Behalf Of Dale Coleman
> Sent: Saturday, January 11, 2003 1745 PM
> To: [email protected]
> Subject: Re: [FADCA] TelPac log fo n0io
> 
> 
> At 08:53 PM 1/10/03, you wrote:
> >Did the SSID -2 fix the problem?
> >Russ
> 
> ---cut---
> Hi Russ and the group. Here is a bit of the log from my 
> TelPac station when
> Bud n0io tried again this morning. Not sure how much of this 
> Bud was able
> to see on the disconnect.
> 
> 1/A:  Making Telnet connection via dial up. Please
> standby...
> 1/A:  Telnet Connect to kn6kb.no-ip.com @ 1/11/03
> 5:22:06 AM
> 1/A:  Telnet Logon to kn6kb.no-ip.com OK!
> 1/A:  Invalid PMBO connection request detected from N0IA
> 1/A:  Telnet Disconnect from kn6kb.no-ip.com @ 1/11/03
> 5:22:07 AM
> 1/A:  DISCONNECTED from  @ 1/11/03 5:27:37 AM
> ******************************
> ...TELPAC Version 0.1.1 closing @ 1/11/03 5:26:49 PM
> 
> 
> There is no legal way that I know of for me to test this. I 
> could change
> the mycall of one of the test TNCs but this could get me in 
> hot water. The
> other problem is my minimal station will not hit W4PLB-8 
> reliably. I tried
> the other day at max power and still could not make it.
> 
> I might get a chance to try and put up the small beam Sunday 
> afternoon.
> 
> I hope this helps,
> 
> Dale
> 
> 
> -
> Dale Coleman
> [email protected]
> http://home.earthlink.net/~kf4sir
> 
> _______________________________________________
> FADCA mailing list
> [email protected]
> http://mailman.qth.net/mailman/listinfo/fadca
> 
> _______________________________________________
> FADCA mailing list
> [email protected]
> http://mailman.qth.net/mailman/listinfo/fadca
> 

*****************************************************************
This e-mail and any files transmitted with it are confidential and are
intended solely for the use of the individual or entity to whom it is
addressed. If you have received this transmission in error, please notify
the sender immediately and destroy any hard copies you may have printed and
remove all copies of the e-mail from your hard drive. Opinions, conclusions
and other information in this message that do not relate to the official
business of Utility Partners, Inc shall be understood as neither given nor
endorsed by it.

Visit us on the web at http://www.utilpart.com 
*****************************************************************