[FADCA] TelPac log fo n0io

Sun, 12 Jan 2003 07:58:56 -0500

All,
The problem with this is since bud is a PMBO (N0IA) and a user (N0IA-1) he
can only connect as a user currently.  Sometimes the digi paths strip off or
change the ssid.

Rick

-----Original Message-----
From: [email protected] [mailto:[email protected]]On
Behalf Of Dale Coleman
Sent: Saturday, January 11, 2003 1745 PM
To: [email protected]
Subject: Re: [FADCA] TelPac log fo n0io

At 08:53 PM 1/10/03, you wrote:
>Did the SSID -2 fix the problem?
>Russ

---cut---
Hi Russ and the group. Here is a bit of the log from my TelPac station when
Bud n0io tried again this morning. Not sure how much of this Bud was able
to see on the disconnect.

1/A:  Making Telnet connection via dial up. Please
standby...
1/A:  Telnet Connect to kn6kb.no-ip.com @ 1/11/03
5:22:06 AM
1/A:  Telnet Logon to kn6kb.no-ip.com OK!
1/A:  Invalid PMBO connection request detected from N0IA
1/A:  Telnet Disconnect from kn6kb.no-ip.com @ 1/11/03
5:22:07 AM
1/A:  DISCONNECTED from  @ 1/11/03 5:27:37 AM
******************************
...TELPAC Version 0.1.1 closing @ 1/11/03 5:26:49 PM

There is no legal way that I know of for me to test this. I could change
the mycall of one of the test TNCs but this could get me in hot water. The
other problem is my minimal station will not hit W4PLB-8 reliably. I tried
the other day at max power and still could not make it.

I might get a chance to try and put up the small beam Sunday afternoon.

I hope this helps,

Dale

-
Dale Coleman
[email protected]
http://home.earthlink.net/~kf4sir

_______________________________________________
FADCA mailing list
[email protected]
http://mailman.qth.net/mailman/listinfo/fadca