[FADCA] Fbb & BPQ

[n4xeo]

At 12:32 PM 2/21/2003 -0500, you wrote:
>Hi all,
>
>I recently have been experimenting with FBB here and have been trying to get
>it to interface with BPQ. I'm hoping that maybe someone on the list is
>running a similar setup and can give me some pointers.

Hi Doug

How about a copy of your bpqcfg.txt. Both ports one and 2 should look the 
same except for the com port since you are using the same tnc's on both. 
I'll have to look at my cfg file to see if what I'm going to say is true.

I belive that in bpq you have to start with port 0 (which really is port 1) 
port 1 (which is 2) and then port 2 (which is 3) I'll have to look at mine 
to see if that is true. Send out a copy of your complete port.sys and 
bpqcfg.txt  in the same message so I don't have to keep switching to see 
what everything is.

FBB is a bear to get going, but then it is no problem. I can send you how I 
have my routing etc set up to make it easy to make the change.  One thing 
you will find is that since you are using bpq for a kiss interface, you 
will only be able to run fbb in win98se or lower.  You might want to look 
at using just the host driver for the tnc if fbb has one instead of using 
bpq. You really don't need bpq unless fbb doesn't have a driver for the 
kantronics...This you will have to find out on your self...

73, Bill N4XEO