[FADCA] Re: [Packet_USA] Winpack to Telnet

Fri, 31 May 2002 19:35:21 -0400

Deltona
Friday May 31 1930EDT

HI, Bob:

> I worked through the problem with Roger G4IDE the author of Winpack. I
need
> to retrive my Win95 CD this weekend and try the fix.

Great- glad you got the Winpack telnet working. Winpack is a good choice for
general packet work.  Please let me know what it takes to get Winpack/telnet
working.

> I Like Winpack for all my packet work. I will get the telnet to work. As
far
> as fowarding I will setup WinFBB here at the house, where the following is
> my big plan.
>
>     BBS store and foward to W4IE in Sarasota, FL "Hopefully"
>     User         port 1200b VHF 2m    packet
>     Fpac         port 9.6k  UHF 70cm  packet
>     Forwarding   port 9.6k  VHF 2.25m packet
>     Forwarding   port ?baud HF        pactor I

That looks real good - begs some questions:

What LAN wil your 2M user port be on?  Which FPAC/ROSE swtich will you be
using?

What Data Terminal will you be using on the WinFBB HF PacTOR I port?

73,
bud N0IA

----- Original Message -----
From: "Stacey & Bob H." <[email protected]>
To: "bud Thompson" <[email protected]>
Cc: "FADCA List" <[email protected]>
Sent: Friday, May 31, 2002 6:27 PM
Subject: [FADCA] Re: [Packet_USA] Winpack to Telnet

>
> ----- Original Message -----
> From: "bud Thompson" <[email protected]>
> To: <[email protected]>; "Russell Oder N4KOX" <[email protected]>
> Cc: "Bill Sinbine N4XEO" <[email protected]>
> Sent: Friday, May 31, 2002 06:48
> Subject: Re: [Packet_USA] Winpack to Telnet
>
>
> > Deltona
> > Friday May 31 0645EDT
> >
> > Hi, Bob:
> >
> > Our ARES/RACES group here uses WinPac, but no one is familiar with
telnet
> > through it so far as I know.  I'm cc Bill N4XEO on this in case he does.
> >
> I worked through the problem with Roger G4IDE the author of Winpack. I
need
> to retrive my Win95 CD this weekend and try the fix.
>
> >I can study that and see what I can learn, but can't promise you I can
get
> > to it until mid to late next week. I'm up to "here" with projects! Har.
> >
> > Do you know if the WinPac Telnet has to go through BPQ interface? Do
you
> > use the Winpac BPQ interface for anything else?
> >
> > Another possibility to examine for your needs is to actually run
WinFBB -
> I
> > assume that Bill N4XEO could give you a lot of help with setting that up
> for
> > Telnet. (I run WinFBB here but have not done any telnet!)
> >
> I Like Winpack for all my packet work. I will get the telnet to work. As
far
> as fowarding I will setup WinFBB here at the house, where the following is
> my big plan.
>
>     BBS store and foward to W4IE in Sarasota, FL "Hopefully"
>     User         port 1200b VHF 2m    packet
>     Fpac         port 9.6k  UHF 70cm  packet
>     Forwarding   port 9.6k  VHF 2.25m packet
>     Forwarding   port ?baud HF        pactor I
>
> Best Regards
>
> Bob N4WFH located in grid EL87vb
> 941.423.4661
> North Port, Fl
> [email protected]
> n4wfh@kf4hfr.#SWFL.FL.USA.NOAM
> Peace River Repeater River Asso. (Webmaster)
> http://home1.gte.net/res04c83/prra.htm
> SkyWarn Spotter CHA-176
> ICQ# 13872526
>
> _______________________________________________
> FADCA mailing list
> [email protected]
> http://mailman.qth.net/mailman/listinfo/fadca