[FADCA] TLH VHF Site

Mon, 15 Apr 2002 08:04:27 -0400

Russ, Group.
See below.

> -----Original Message-----
> From: [email protected] [mailto:[email protected]]
> Sent: Monday, April 15, 2002 03:54 AM
> To: [email protected]
> Subject: RE: [FADCA] TLH VHF Site
> 
> 
> Doug, Bud and I are  working to converting our Mitrek's to
> 9.6 use. Like Chuck asked, are these UHF or VHF.
> 
> Also, the KPC is not, as far as I know, usable for
> installing on FPAC or ROSE if they  will be used for the
> site.  You need a TAPR2 Clone (MFJ 1270B or PACCOM Tiny2 or
> Sprint, etc.)

It is just fine for FPAC since it will operate in KISS mode.
Also there is a way to use the multi-port version, I am not
sure how, the french guys did it and that way got a 9k6 port
and a 1k2 port out of the same box. The code is in FPAC it
has never been (to my knowledge) documented. It maybe in the
LINUX version, but I know it is not in the DOS version.

> 
> Do you have a means of checking the   site for UHF?
> 
> Russ
> 
> On Sun, 14 April 2002, [email protected] wrote
> 
> > 
> > See below
> > 
> > > -----Original Message-----
> > > From: Doug Ferrell [mailto:[email protected]]
> > >   	I'm going to the tower site today to see what freqs 
> > > will work. I have
> > > been told that it's an extremely quiet site, no
> interference 
> > > from paging
> > > systems etc. Only thing is that the space available is 
> > > 
> > > 	I do have 2 Motorola MITREK's that I have and plan to 
> > > use at some point if
> > > anyone is familiar with how to interface it with a KPC3.
> > > 
> > Are the VHF or UHF? These make great 9k6 radios, you just
> have
> > to dig into them a bit. For a switch site they (like most
> MOT
> > boxes) are geat.
> > 
> 
> 
> _______________________________________________
> FADCA mailing list
> [email protected]
> http://mailman.qth.net/mailman/listinfo/fadca
> 

*****************************************************************
This e-mail and any files transmitted with it are confidential and are
intended solely for the use of the individual or entity to whom it is
addressed. If you have received this transmission in error, please notify
the sender immediately and destroy any hard copies you may have printed and
remove all copies of the e-mail from your hard drive. Opinions, conclusions
and other information in this message that do not relate to the official
business of Utility Partners, Inc shall be understood as neither given nor
endorsed by it.

Visit us on the web at http://www.utilpart.com 
*****************************************************************