[Exotics] RA6709GM-23
[email protected]
[email protected]
Tue, 6 May 2003 13:16:48 -0700
I recently received a RACAL RA6790GM-23. There is some control function=20
but not complete response. I'm using the test procedures from the R-2174=20
(P )/ URR manual so I don't know if it is all the same. I haven't been=20
able to find any documentation on this receiver as yet.
Here is what I have so far........
--A1 LPF 08385 - same as the R-2174
--A2 1st Mixer 09635 REV C - 080386 in the R-2174
--A3 2nd Mixer 08191 REV B - same as the R-2174
--A4 IF - totally different from th=
e=20
R-2174
A4A1 IF Filters 4100506-501 REV E
A4A2 IF 4100505-501 REV B
A4A3 IF DET 4100568-501
The A4 PCB is broken down into 3 separate PBCA's.=20
A4A1 has the three XTAL Filters with 350 Hz, 750HZ, and 1.4KHz BP.=20
A4A2 looks like switching and amps.
A4A3 is in a shielded container and looks like the detector.=20
All three PCBA's fit into the same area as a regular A4 PCB.
--A5 ISB - totally different from th=
e=20
R-2174
A5A1 Looks like a data interface 4100369-501 REV A
A5A2 ??? 4100215-501 REV A
In the area where the ISB A5 PCB would go is two PCB's ID'ed as A5A1 and =
A5A2.=20
These are some sort of data interface.
--A6 totally different from the R-2174
=20
A6A1 ACSII Interface - not installed
A6A2 Microprocessor (Z80) 4100030 - not same
A6A2 Microprocessor is a Z80 in this RCVR and the A6A1 ACSII interface=20
isn't installed.
--A7 1st LO/SYNTH 09134 - 08387 in the R-2174
--A8 2nd LO/BFO 096?? (numbers obscured/unreadable)
--A9 didn't check yet
--A10 didn't check yet but looks like a normal R-2174 P/S
There is line audio/no phone audio. No detected signal at the audio. No=20
signal indication on LCD.
Tonight I will check and compare the signal routes against the R-2174=20
manual and see if I can get some signal thru the receiver.
Any help out there???????
RICH WA6KNW