[ETO_Alpha] need new blower/fan

Sat, 15 Jun 2002 09:01:35 -0400

Dear John, et.al.,

If you go to the Alpha website you can find the following:

 REPLACEMENT BLOWER FOR ALPHA
78, 76A SERIES, AMD 374A AMPLIFIERS

The original blower motor, manufactured by Howard Industries,
is no longer available. An exact replacement motor is available
from BOMAX Inc. The model number is # 301-6563.
The blower motor is designed for 115VAC, 60HZ and will run
about 20% slower when used on 50Hz. It is in use in amps
in Europe and cooling is adequate.

The web site is:
http://www.alpha-amps.com/html/blower.htm

Good luck -  by the way, I assume you have checked the allignment of the
blower in the frame and it is not just rubbing on the housing.

George        K8GG

----- Original Message -----
From: "JOHN DOBSON" <[email protected]>
To: <[email protected]>
Sent: Saturday, June 15, 2002 12:10 AM
Subject: [ETO_Alpha] need new blower/fan

> for my alpha 76pa  serial number 53XX
> who do I contact?
> I looked and could not find a part number for this...
> thanks
> "john" w8wej
>
>
> _______________________________________________
> ETO_Alpha mailing list
> [email protected]
> http://mailman.qth.net/mailman/listinfo/eto_alpha
>
>