[Elecraft] Sticky low TX power level after ATU activation?

David Gilbert ab7echo at gmail.com
Tue Oct 27 16:40:48 EDT 2026


Mostly none of that is true.  Just as insulation (with a typical 
dielectric constant around 3.0) affects the velocity factor of a wire, 
clean water (with a dielectric constant around 80) also affects the 
velocity factor of a wire ... except by a lot more.

Of course dirty separators ... and they are almost always 
microscopically dirty due to dust buildup in the cracks caused by 
sunlight and weathering ... can also affect open wire line when wet by 
providing a conducting path, especially at the high voltage points often 
existing on open wire line.

But to say that water on an open wire line (like during a rain) doesn't 
affect it is simply wrong.

Dave   AB7E

p.s.  Here is a YouTube video on some dielectric loading tests I did on 
a 100 MHz dipole.   https://youtu.be/YJTJcWPkVdA




On 10/27/2026 12:45 PM, Jack Brindle via Elecraft wrote:
> I believe window line is the same as ladder line which has a plastic coating on both the wire and separators.  Ladder line is definitely subject to change when it gets wet.
>
> Open-wire, on the other hand is not generally subject to change when it gets wet, unless, as Jim points out, the separators have issues when wet. The separators on the open-wire line I have used have not been subject to wet issues, and have worked very well. On the other hand, the ladder line-fed antenna definitely need to be returned when wet.
>
> No idea if this is the issue the original poster was having.
>
> 73,
> Jack, W6FB
>
>
>> On Oct 27, 2026, at 12:19 PM, Jim Brown via Elecraft <elecraft at mailman.qth.net> wrote:
>>
>> On 10/27/2026 7:52 AM, Ray WA6VAB via Elecraft wrote:
>>> Mike.. are you having Wet weather?  Rain can affect the Z of an open Wire
>>> System.
>> The very good scientific work I've seen on this was done on Window line, not open wire line, by N7WS more than 20 years ago by N7WS, and published by ARRL in one of their excellent Antenna Compendiums. It would apply to open wire line ONLY with wood insulators.
>>
>> 73, Jim K9YC
>>
>>
>> ______________________________________________________________
>> Elecraft mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:Elecraft at mailman.qth.net
>>
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>> Message delivered to jackbrindle at me.com
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to ab7echo at gmail.com



More information about the Elecraft mailing list