[Elecraft] FT8 on the Elecraft KH1 -- Android app now available
Wayne Burdick
n6kr at elecraft.com
Thu Nov 19 13:34:17 EST 2026
I thought I'd relay this posting for the benefit of those not
subscribed to the Elecraft KX/KH transceiver forum.
Wayne
N6KR
* * *
Thanks to the work of Andrea Salvatore (IU4APC), you can now easily
make FT8 and FT4 QSOs using the Elecraft KH1 hand-held 5-band
transceiver. KH1 Companion is a free Android app that turns a phone
into a digital-mode station for the KH1. It's now on Google Play.
How it works: the phone controls the radio through the KXUSB cable,
and hears it through its own microphone, close to the KH1 speaker or
earphones. The KXUSB carries commands only, so there's no audio cable
and no sound card. A laptop isn't needed either. It makes a very small
field kit.
What it does:
- FT8 and FT4: a live waterfall with every decoded station labelled.
Tap a station to answer, or call CQ. There's a list and an azimuthal
map of the stations calling CQ, and the stations already in your log
are marked. The app checks your clock against the decodes, and it can
set the KH1 date and time.
- WSPR: a beacon with the KH1, once or on a schedule, at LO or HI
power. "Heard me" reports from wspr.live and PSKReporter, as a list or
on a map.
- CW decoder: from the KH1 speaker or earphones, and it also works
without the cable. You can replay the last seconds or record a QSO.
- The six CW message memories (M1-M6) can be read and edited from the phone.
- POTA and WWFF spots on the KH1 bands. Tap a spot and the KH1 tunes to it.
- Radio control: frequency, band, mode and AF gain. Power LO/HI and
the TX TEST state are read from the radio when it connects. ATU tune,
the power-on banner, and a configuration backup in the KH1 Utility
format.
- A log with ADIF export and import.
On transmitting: nothing goes on the air until you press a button and
confirm an antenna or dummy load. A WSPR beacon or a CQ then keeps
going on its schedule until you press Stop. Power, TX TEST and the ATU
are set through the KH1 front panel, step by step, with the app
reading the display before each press. A simulation mode lets you try
everything without the radio.
What you need:
- a KH1 and the KXUSB cable, with MENU:KEY JACK set to RS232;
- a USB-C OTG adapter, or a powered hub, for the phone;
- Android (iPhone version in the works)
A few screenshots from the Google Play listing:
- Google Play: https://www.google.com/url?q=https://play.google.com/store/apps/details?id%3Dcom.onesmallstepapps.kh1companion&source=gmail&ust=1795108170522000&sa=E
- More screenshots:
https://www.google.com/url?q=https://onesmallstepapps.com/kh1-companion/&source=gmail&ust=1795108170522000&sa=E
Andrea said he'd love to get user feedback. He can be reached at:
andrea at onesmallstepapps.com.
The app is independent and not affiliated with Elecraft. KH1 and
Elecraft are trademarks of Elecraft Inc.
--
Elecraft, Inc.
More information about the Elecraft
mailing list