[Elecraft] Help
John Perlick
jperlick at ariacorp.com
Mon Nov 16 03:19:11 EST 2026
Please unsubscribe me from Elecraft emails.
Thanks!
John Perlick
K0UM
________________________________
From: elecraft-bounces at mailman.qth.net <elecraft-bounces at mailman.qth.net> on behalf of elecraft-request at mailman.qth.net <elecraft-request at mailman.qth.net>
Sent: Saturday, November 14, 2026 10:00 AM
To: elecraft at mailman.qth.net <elecraft at mailman.qth.net>
Subject: Elecraft Digest, Vol 271, Issue 8
Send Elecraft mailing list submissions to
elecraft at mailman.qth.net
To subscribe or unsubscribe via the World Wide Web, visit
http://mailman.qth.net/mailman/listinfo/elecraft
or, via email, send a message with subject or body 'help' to
elecraft-request at mailman.qth.net
You can reach the person managing the list at
elecraft-owner at mailman.qth.net
When replying, please edit your Subject line so it is more specific
than "Re: Contents of Elecraft digest..."
Today's Topics:
1. K4 Spectrum Streaming documentation? (Gerry Hull)
2. New K4 & K4/0 production software available (R40) (Wayne Burdick)
----------------------------------------------------------------------
Message: 1
Date: Fri, 13 Nov 2026 14:09:36 -0500
From: Gerry Hull <gerry at w1ve.com>
To: elecraft at mailman.qth.net
Subject: [Elecraft] K4 Spectrum Streaming documentation?
Message-ID:
<CAGNAsX5kh3LGTf7PnKPA+bkbm5335TDxDG6ntzgLbB3RNW4mfA at mail.gmail.com>
Content-Type: text/plain; charset="UTF-8"
Hi All,
The manual says this is available. -- I've asked for it with no response.
Can anyone here send me a copy?
-73
*Gerry Hull, W1VE*
Columbia Falls, ME
Also: 7Q2T, ZF2VE, VY1AAA, VE1RM, etc.
https://w1ve.hamwall.org Share your accomplishments at hamwall.org
Interested in remote operating? See remote.radio
Ham radio related software on Github <https://github.com/w1ve>
------------------------------
Message: 2
Date: Fri, 13 Nov 2026 11:36:31 -0800
From: Wayne Burdick <n6kr at elecraft.com>
To: elecraft <elecraft at mailman.qth.net>
Subject: [Elecraft] New K4 & K4/0 production software available (R40)
Message-ID:
<CAE8SmRXry1MngbN82aQswAthcDF0sy-xPgosKcGfFmymeMtaDw at mail.gmail.com>
Content-Type: text/plain; charset="UTF-8"
Software release R40 has been promoted to full production status. It
includes several new features, bug fixes, and new or enhanced remote
control commands. See full release notes below.
This release is recommended for all K4 and K4/0 owners. To ensure 100%
interoperation between transceivers and K4/0s (or remote control software
apps), you'll need to update both local and remote units.
73,
Wayne
N6KR
===========================================================
====================== R40.PRODUCTION =====================
===========================================================
November 11, 2026
------------
NEW FEATURES
------------
- TWO NEW WAYS TO DO BAND SELECTION:
Tapping the <GEN> (General Coverage) button replaces the normal BAND labels
with your first 12 non-ham/SWL frequency memories, showing VFO A values, as
well as text labels if applicable. The search starts at memory #001, so you
may wish to move your favorite SWL frequencies to low-numbered memories.
This is a much more convenient way to QSY to general-coverage frequencies
than scrolling through the <RCL> button list.
Similarly, tapping <MEM> displays the first 12 memories that are within ham
bands. Tapping <XVTR> still displays up to 12 transverter bands.
- NEW SSNR ICON (NR+): When SSNR (spectral subtraction noise reduction) is
in effect, the NR icon changes to NR+.
- NEW SSNR NOISE FLOOR RESET CONTROL: When SSNR is in effect, a <RESET>
button appears in the NR ADJ controls group. RESET may be tapped in the
absence of any signal to optimized the noise floor of the SSNR algorithm.
You can also perform a RESET using the NRS~; command, which can be assigned
to any programmable switch for quick access.
- PROGRAMMER'S REFERENCE AVAILABLE AT THE RADIO: To view the Programmer's
Reference, first tap the <?> (INFO) button to bring up the Operating
Manual, then tap the "gear" button. To search for commands in the
Programmer's Reference, tap the magnifying glass icon. This brings up the
on-screen keyboard.
- TRANSVERTERS NOW SUPPORTED IN REMOTE MODE. You can now recall a
transverter band on a remote server via a K4, K4/0, or software remote
client.
---------
BUG FIXES
---------
- BAND BUTTON TIMEOUT: The band button array now disappears automatically
after a 5-second period where none of the buttons are tapped, as was the
case in earlier versions.
- REMOTE CLIENT AUTO-CONNECT AT BOOT BUG FIXED: The RX Audio Latency
adjustment dialog now works correctly in this case.
- TRANSMIT CANCEL IMPROVEMENT: When any alert message is displayed, we
allow TUNE, XMIT, ATU TUNE, VOX, ANT, RXANT, and REC buttons to cancel
transmit and dismiss the alert window. This is especially important when
exiting internal or external fault conditions that occur while the K4 is in
transmit mode.
--------------
FOR DEVELOPERS
--------------
- NRS~; does the same thing as the SSNR RESET button (see above).
- MBn; command added where n = 0 is message bank 1, and n = 1 is message
bank 2.
- MB/; toggles the message bank.
- RE/; and TE/; toggle between FLAT and the last-used RX/TX EQ values.
- REF; and TEF; commands force RX/TX EQ to FLAT.
--
Elecraft, Inc.
------------------------------
_______________________________________________
Elecraft mailing list
Post to: Elecraft at mailman.qth.net
http://mailman.qth.net/mailman/listinfo/elecraft
You must be a subscriber to post.
Elecraft web page: http://www.elecraft.com
End of Elecraft Digest, Vol 271, Issue 8
****************************************
More information about the Elecraft
mailing list