[Elecraft] Elecraft Digest, Vol 271, Issue 3

Anthony lxxc52 at yahoo.com
Tue Nov 3 13:12:45 EST 2026


 The KAT500 utility is good advice.  I have my K4, KPA500, and KAT500 ganged together with their DB15 (think I remember correctly) cables, and they jump from band to band right along with each other.  I'd start with the utility, though.73,Anthony/AB7Z
    On Tuesday, November 3, 2026 at 10:18:16 AM MST, elecraft-request at mailman.qth.net <elecraft-request at mailman.qth.net> wrote:  
 
 Send Elecraft mailing list submissions to
    elecraft at mailman.qth.net

To subscribe or unsubscribe via the World Wide Web, visit
    http://mailman.qth.net/mailman/listinfo/elecraft
or, via email, send a message with subject or body 'help' to
    elecraft-request at mailman.qth.net

You can reach the person managing the list at
    elecraft-owner at mailman.qth.net

When replying, please edit your Subject line so it is more specific
than "Re: Contents of Elecraft digest..."


Today's Topics:

  1. KAT500 / KPA500 band switching (Jerry Ford)
  2. Re: KAT500 / KPA500 band switching (Jack Brindle)
  3. An Interesting Video About Coax... (Kurt Pawlikowski)


----------------------------------------------------------------------

Message: 1
Date: Mon, 2 Nov 2026 21:27:10 -0600
From: Jerry Ford <n0jrn1 at gmail.com>
To: ELECRAFT <elecraft at mailman.qth.net>
Subject: [Elecraft] KAT500 / KPA500 band switching
Message-ID:
    <CAERWXcuocM_ufMzgD=Jq+6p6VsszVrx2qjeU76oJCsbn2DZqiA at mail.gmail.com>
Content-Type: text/plain; charset="UTF-8"

Hey gang:    Been a long time since I checked in here.  Just getting
things back on the air after a long break.
I need a bit of advise.  I don't remember how to change band / antenna
settings for my KAT500.
It has memories stored from a previous setup and anything 30 meters and
down changes to antenna 2.  I no longer have an antenna 2.  I want to
change this memory setting so all bands are on antenna 1.
The manual isn't helping me much so thought I would ask you guys.
How do I clear the memories on lower bands and change everything to antenna
1?
Thanks a bunch:
73
Jerry            N0JRN


------------------------------

Message: 2
Date: Tue, 3 Nov 2026 00:29:13 -0600
From: Jack Brindle <jackbrindle at me.com>
To: Jerry Ford <n0jrn1 at gmail.com>
Cc: ELECRAFT <elecraft at mailman.qth.net>
Subject: Re: [Elecraft] KAT500 / KPA500 band switching
Message-ID: <CDA45846-174F-4505-B66E-BF029AF44957 at me.com>
Content-Type: text/plain;    charset=utf-8

Jerry;

Go to the Elecraft web site and download the KAT500 utility for your computer. It will allow you to enable and disable ports, and should also allow you to clear the memories, although I don?t remember how to do this. Hopefully someone else will jump in and remind both of us.

Note that selecting the band and thus memories in the KAT is separate from anything the KPA500 does. The KPA cannot communicate with the KAT, unfortunately. The band info comes from the K3, K4 or whatever transceiver you are using.

73,
Jack, W6FB


> On Nov 2, 2026, at 9:27?PM, Jerry Ford via Elecraft <elecraft at mailman.qth.net> wrote:
> 
> Hey gang:    Been a long time since I checked in here.  Just getting
> things back on the air after a long break.
> I need a bit of advise.  I don't remember how to change band / antenna
> settings for my KAT500.
> It has memories stored from a previous setup and anything 30 meters and
> down changes to antenna 2.  I no longer have an antenna 2.  I want to
> change this memory setting so all bands are on antenna 1.
> The manual isn't helping me much so thought I would ask you guys.
> How do I clear the memories on lower bands and change everything to antenna
> 1?
> Thanks a bunch:
> 73
> Jerry            N0JRN
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to jackbrindle at me.com



------------------------------

Message: 3
Date: Tue, 3 Nov 2026 08:48:33 -0600
From: Kurt Pawlikowski <kurtt at pinrod.com>
To: kurtt <kurtt at pinrod.com>
Subject: [Elecraft] An Interesting Video About Coax...
Message-ID: <d0ac179a-d526-4e9f-bb99-cdc8f3357d6e at pinrod.com>
Content-Type: text/plain; charset=UTF-8; format=flowed

Hi!

 ? ? Ran across this AI generated video about coax which seems to 
highlight many good practices. Maybe you'll find it interesting and/or 
useful!

 ? ? kurtt WB9FMC

https://www.youtube.com/watch?v=92de_mMNlTA



------------------------------

_______________________________________________
Elecraft mailing list
Post to: Elecraft at mailman.qth.net
http://mailman.qth.net/mailman/listinfo/elecraft
You must be a subscriber to post.
Elecraft web page: http://www.elecraft.com

End of Elecraft Digest, Vol 271, Issue 3
****************************************
  


More information about the Elecraft mailing list