[Elecraft] KAT500 / KPA500 band switching

Jack Brindle jackbrindle at me.com
Tue Nov 3 01:29:13 EST 2026


Jerry;

Go to the Elecraft web site and download the KAT500 utility for your computer. It will allow you to enable and disable ports, and should also allow you to clear the memories, although I don’t remember how to do this. Hopefully someone else will jump in and remind both of us.

Note that selecting the band and thus memories in the KAT is separate from anything the KPA500 does. The KPA cannot communicate with the KAT, unfortunately. The band info comes from the K3, K4 or whatever transceiver you are using.

73,
Jack, W6FB


> On Nov 2, 2026, at 9:27 PM, Jerry Ford via Elecraft <elecraft at mailman.qth.net> wrote:
> 
> Hey gang:     Been a long time since I checked in here.  Just getting
> things back on the air after a long break.
> I need a bit of advise.  I don't remember how to change band / antenna
> settings for my KAT500.
> It has memories stored from a previous setup and anything 30 meters and
> down changes to antenna 2.  I no longer have an antenna 2.   I want to
> change this memory setting so all bands are on antenna 1.
> The manual isn't helping me much so thought I would ask you guys.
> How do I clear the memories on lower bands and change everything to antenna
> 1?
> Thanks a bunch:
> 73
> Jerry            N0JRN
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to jackbrindle at me.com



More information about the Elecraft mailing list