[Elecraft] Rack Mounting Kit for the KPA500
Jim Rhodes
jimk0xu at gmail.com
Thu Oct 23 18:44:44 EDT 2025
I bought a kit from NovexComm to mount my KPA500/KAT500. They do
advertise on ebay, but I bought direct from them because I wanted mine with
the KAT500 on the bottom, and they made a kit up special. This was years
ago and maybe they don't do that anymore, but it just made sense to me. I
like to RTTY contest and things can heat up. Oh, and they are much less
expensive than the SNS ones on the Elecraft page. It did require a bit of
fabrication and there are a couple small holes in one side of the KPA500
case if I remember correctly.
On Thu, Oct 23, 2025 at 3:24 PM Augie "Gus" Hansen via Elecraft <
elecraft at mailman.qth.net> wrote:
> Hello Gary.
>
> > I recently acquired a KPA500 amp and the KAT500 tuner and I'm wanting to
> > rack mount them. Unfortunately, I can't find any brackets or any way to
> > mount them in the cabinet. Anyone have any ideas or know where I can
> find
> > some brackets for mounting? One place in CA used to sell a mounting kit
> but
> > don't any longer. Any help would be appreciated.
>
> My QRZ page shows a short rack system that I assembled several years
> ago. It contains a K3S + P3 combo and a KPA1500. Not shown is what you
> need for the KPA500 + KAT500 setup. I have such a system in my
> collection of Elecraft equipment.
>
> The rack panels were obtained from SNS Engineering:
> https://www.snsengineering.com/
>
> You can mount the tuner above or below the amp. It makes a tidy system
> that I use for portable operations. The panels are a bit expensive, but
> they are very durable and attractive. (SNS has done the metal work for
> some Elecraft products in addition to these external products.)
>
> 73,
> Gus Hansen
> KB0YH
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to jimk0xu at gmail.com
--
Jim K0XU
jim at rhodesend.net
More information about the Elecraft
mailing list