[Elecraft] Remote Question

[Gerry Hull]

It is up to the station owner as to what call is used.  The remote operator
must stay within his privleges if he signs hid call.

If the station owner is not monitoring/at the controls of the station, then
they are not a "control operator".  Simply being in the same room on
another band does not count.

See the special July 2025 issue of NCJ on Remote, with an article on this
particular topic.

73

Gerry Hull, W1VE
Remote op @ N5J, E51D, VP6A, ZF5T, 7Q2T, K1TTT, K2LE, VY1AAA and many
others.


On Mon, Jul 21, 2025, 1:05 PM Rick nk7i via Elecraft <
elecraft at mailman.qth.net> wrote:

> In the US (FCC), the licensed K4/0 user is defined as a /control
> operator/ of the friends K4D (to allow legal manipulation of the
> transmitter controls).  Either call could legally be used (with
> permissions of course, implied since the K4D password was shared); but
> the log book should show the _*transmit*_ location; not the location of
> the K4/0.
>
> For complete clarity (US), in CW/digital, the full call would show as
> "<K4/0 client call>/<K4D call>" (more than FTx would permit).
>
> On phone "<K4/0 call> via <K4D call>"
>
> That's precise and tedious, so most won't bother and would simply use
> the K4/0 client call.
>
> 73,
> Rick nk7i
>
>
> On 7/21/2025 9:20 AM, Tommy Judson via Elecraft wrote:
> > Whose call is used when remote from K4/0 to a friend's K4d in same call
> area?
> >
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to gerry at w1ve.com