[Elecraft] K3 : PTT-KEY setting

[evert at pa2kw.com]

Hi Jim,

Tnx for the quick response.
Yes, I used the K3 ON/OFF button (left the power supply on).
Agree, that is the normal way.
So I was surprised to see that only the PTT-KEY setting went back to it's previous (Default ?) state.
The reason for my question.

73, Evert

PA2KW / 5T2KW / W8S 



-----Original Message-----
From: elecraft-bounces at mailman.qth.net <elecraft-bounces at mailman.qth.net> On Behalf Of Jim Brown via Elecraft
Sent: Friday, 5 December 2025 09:38
To: elecraft at mailman.qth.net
Subject: Re: [Elecraft] K3 : PTT-KEY setting

On 12/5/2025 12:17 AM, Evert via Elecraft wrote:
> After a power cycle, all settings were as expected except the PTT-KEY setting. It went back to OFF - OFF.

HOW did you Power Off? With the K3 On/Off button? That's the right way
-- the K3 saves its settings when you do that. But NOT if you kill the power supply -- when it restarts, it's with the last time you used the
K3 On/Off button to turn the rig off.

73, Jim K9YC
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html Message delivered to evert at pa2kw.com