[Elecraft] power switches for 120 and 240 volts

[Kosta Kropivny VA7KL]

Thank you Mike.

K4 power supply requires one 120 volts switched port (15 amp standard),
KPA1500 power box requires one more 240 volts switched port (20 amp per
spec).
DLI switch has one source port and 8 destination ports. So I need two DLI
switches for two voltages. Each 19" wide... great solution for the
DataCenter, but overkill for a shack.

I use https://www.adafruit.com/product/268 for my fish pond pump 120 v,
controlled by Raspberry Pi. There is no such thing for 240 v for KPA1500.

- Kosta


-----Original Message-----
From: elecraft-bounces at mailman.qth.net <elecraft-bounces at mailman.qth.net> On
Behalf Of Mike Dodd
Sent: Monday, November 4, 2024 8:19 PM
To: elecraft at mailman.qth.net
Subject: Re: [Elecraft] power switches for 120 and 240 volts

On 11/4/2024 11:00 PM, Kosta Kropivny VA7KL wrote:
> Hello
> 
>   
> 
> To access K4 + KPA1500 remotely, I am looking for the power switches 
> for 120 and 240 volts, controlled over the internet. Any suggestions?

DLI has a remote power switch it says works on 80-240 VAC: 
<https://dlidirect.com/products/new-updated-rack-pdu-with-wifi>

If you download the spec sheet at
<https://www.digital-loggers.com/222spec.pdf>, you'll see this line: 
"Input and Outlet Rating UL, CSA 15A, 85-240VAC."


Looks like this might be what you're looking for. DLI's phone number is 
(408) 330-5599.

--- Mike

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to admin at va7kl.com