[Elecraft] Configure to send CW in SSB mode?

[Dick Dievendorff]

Use the CW WGHT menu item,  tap the 1 digit.  See the description of CW WGHT around page 59 of the K3S owners manual.

73 de Dick, K6KR

> On Mar 8, 2024, at 12:55, Mike Dodd <mike at mdodd.com> wrote:
> 
> I just received a used K3 as a backup rig (had a K3s before the K4).
> 
> The manual says, and I know 5his to be true, "You can transmit in CW when SSB mode is selected by just hitting the key or paddle."
> 
> But when I hit my key in LSB mode, no CW is transmitted. Is there a CONFIG or MENU item I need to set to enable this?
> 
> The K3 Utility says this K3 is up-to-date on all firmware releases.
> 
> Thanks for any/all pointers.
> 
> 73, Mike N4CF
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to dick at elecraft.com