[Elecraft] K3/100 TX problem on 20m

[Masadaman]

I don't want to be here

Yahoo Mail: Search, Organize, Conquer 
 
  On Tue, Mar 5, 2024 at 9:15 AM, Paul Kent<paulk53 at mediacombb.net> wrote:   
My K3/100 gives a high DC current warning when transmitting on 20m with power settings above 75 watts. Maximum output is about 80 watts and is unstable. All other bands perform normally with full 100w output and normal current draw. (50 ohm dummy load) I have done the TX gain and wattmeter calibrations, finding no issues and with no change in symptoms. The output LPF is shared with 30m and I replaced all the capacitors in that circuit, also with no change in symptoms. Any ideas on what may be causing this problem?
Paul, K0PK
Sent from Mail<https://go.microsoft.com/fwlink/?LinkId=550986> for Windows

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to masadaman at yahoo.com