[Elecraft] K2 - Transmit limits

[Mark Musick]

Hello Pierre,
There is no procedure. It is programed in the radio's firmware.
All Elecraft radio's do this.
You can contact support about getting the K2 firmware programmed specifically for the Thailand amateur bands. They probably have dealt with this before.

73,
Mark, WB9CIF

-----Original Message-----
From: elecraft-bounces at mailman.qth.net <elecraft-bounces at mailman.qth.net> On Behalf Of JCG
Sent: Sunday, March 3, 2024 07:35
To: elecraft at mailman.qth.net
Subject: [Elecraft] K2 - Transmit limits

Sir,
I plan to order and build a CW K2 to use it in Thailand. That country is very strict about licencing of transceivers and require that they cannot transmit outside of the local Ham Bands limits.
Your manual v1 shows on page 95: "Transmit Limits: Some countries require transmit to be disabled  outside of specified amateur bands. If you key the transmitter with the VFO set outside fixed limits, you'll see End on the LCD." Where can I find precisely the procedure to execute, I did not find it in the manual.
73 - Pierre - FK8IH
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft at mailman.qth.net

This list hosted by: http://www.qsl.net/
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to markmusick at outlook.com