[Elecraft] K2

[Larry Boekeloo]

Hi everyone

I need to look at the microphone settings in my K2.

After reading the manual, it states to pull the 4 screws holding the front
panel.

When I look at YouTube videos, I see two methods.  One person pulls the 4
screws and the front panel seems to pull off with some ease plus the board
attached and all knobs and VFO knob in place.  The other person pulls the 4
screws and then pulls all of the knobs off, VFO knob and the nuts holding
them and pulls the front panel from the board behind it.

Does it matter what the serial number of the K2 is for the procedure?  I
need some info before I attempt this minor project.

Thanks.

Larry, KN8N
Kalamazoo Michigan