[Elecraft] KAT 500 Loses Match

[David Gilbert]

That sounds EXACTLY like an arc over somewhere past your KAT500.  Could 
be a connector, the coax, the connection to the dipole, or any similar 
spot, but my bet would be the connection to the connector or the 
connector itself.

Dave  AB7E



On 1/12/2024 2:46 PM, Paul Ecker wrote:
> I am experiencing a new problem for me, with my KAT 500. So far I've
> noticed this issue on 30M. I am using a dipole cut only for 30M with an SWR
> of 1.2 to 1.3 max SWR across the band. I “trained the tuner” at 20khz
> segments on 30M.
>
> Setup is K4D, KAT 500 & KPA 500. Win 10 pc.
>
> Running CW, I can start transmitting and all is fine- my LP100A is showing
> 1.2 SWR and am getting max power out of the radio. Then all of sudden the
> SWR jumps to >9.0. The KAT starts chattering and finds a new match. But if
> I start transmitting again – pwr out is only about 10 W at that new match,
> and eventually the tuner becomes untuned again. Sometimes, it will then
> hold the tune but still only getting abt 9-10w power out. The issue occurs
> with KPA500 both on and off.
>
> Does this sound like a KAT 500 problem or maybe an RFI problem.
>
>
> 73 Paul
>
> w2eck
> ______________________________________________________________
> Elecraft mailing list
> Home:http://mailman.qth.net/mailman/listinfo/elecraft
> Help:http://mailman.qth.net/mmfaq.htm
> Post:mailto:Elecraft at mailman.qth.net
>
> This list hosted by:http://www.qsl.net
> Please help support this email list:http://www.qsl.net/donate.html
> Message delivered toab7echo at gmail.com