[Elecraft] KPA500 Issue?

Paul Ecker eckerpw at gmail.com
Thu Dec 19 15:52:48 EST 2024


Rick
You are quite correct as I look at it again - as I said - not a good
question
So the  issue is closed - thanks for help gentlemen

73 Paul w2eck

On Thu, Dec 19, 2024 at 3:44 PM Rick NK7I <rick.nk7i at gmail.com> wrote:

> If it’s not passing through the KPA, how would it read power?
>
> 73,
> Rick nk7i
>
> > On Dec 19, 2024, at 12:18 PM, Paul Ecker <eckerpw at gmail.com> wrote:
> >
> > Jack & Bill
> > Problem resolved sorta of.
> > Solution: Discovered my own forgetfulness or senior brainfart !!
> > I had forgotten that I had antenna 2 connected directly to the K4D for
> > Diversity purposes, and not connected to the KAT500.
> > Which brings up probably a dumb question. When I transmit on this antenna
> > connected to Ant 2 on the K4, I see power out on the K4 meter, isn't it
> > still traveling the same path thru the KPA-KAT.  Why am I seeing zero on
> > the KPA power meter?
> >
> > 73 Paul w2eck
> > ______________________________________________________________
> > Elecraft mailing list
> > Home: http://mailman.qth.net/mailman/listinfo/elecraft
> > Help: http://mailman.qth.net/mmfaq.htm
> > Post: mailto:Elecraft at mailman.qth.net
> >
> > This list hosted by: http://www.qsl.net
> > Please help support this email list: http://www.qsl.net/donate.html
> > Message delivered to rick.nk7i at gmail.com
>


More information about the Elecraft mailing list