[Elecraft] KPA500 Issue ?

[Bill Johnson]

Have you used the utility on the amp and tuner to be all three antenna choices are selected?  It's been awhile since I field tested the KAT500, but I do recall settings for such.
Bill
K9YEQ

Get Outlook for Android<https://aka.ms/AAb9ysg>
________________________________
From: elecraft-bounces at mailman.qth.net <elecraft-bounces at mailman.qth.net> on behalf of Paul Ecker <eckerpw at gmail.com>
Sent: Wednesday, December 18, 2024 2:10:05 PM
To: elecraft at mailman.qth.net <elecraft at mailman.qth.net>
Subject: [Elecraft] KPA500 Issue ?

Running K4D, KPA500, KAT500 and Win11 PC
I have three antennas connected to the KAT500.
The KPA500 works as expected with antenna 1 & 3 but when antenna 2 is
selected , no power amplification is achieved
Antenna 2 has low SWR on all bands.
I did the testing with the same settings on the K4.
So are there some settings in either the KPA or the KAT setup that I have
missed that may be causing this problem.
Any help would be appreciated
73 Paul w2eck
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to k9yeq at live.com