[Elecraft] K3S + W11 ... boot USB issue.
Terry _George
g4amt at sennen-cove.com
Sun Aug 4 13:54:49 EDT 2024
Thanks Both - tried moving the boot order (no facility to delete); not
resolved the issue.
The PC boots up fine with the USB cable to the K3S disconnected.
Connect the USB cable to the radio - even if powered off - and the PC
will fail to boot up.
PC is Geekom MiniAir 12 running W11Pro 23H2. Working correctly in all
other respects. K3S has latest firmware.
Thanks again for any further help !
On 04/08/2024 16:46, Will Shattuck wrote:
> Or move the Boot by USD below the HDD
>
>
>
> Will Shattuck
> KN6TZK
>
>
> On Sun, Aug 4, 2024 at 8:26 AM Rick NK7I <rick.nk7i at gmail.com> wrote:
>
> Turn off boot by USB in the BIOS?
>
> Rick nk7i
>
>
> > On Aug 4, 2024, at 8:18 AM, Terry _George
> <g4amt at sennen-cove.com> wrote:
> >
> > I have a mini-pc running latest version of W11Pro - K3S
> connecting to it
> > via USB.
> > The PC will not boot with the radio USB cable plugged in; even
> if the
> > radio is off.
> > With the PC booted up, plug the radio USB in and all works normally.
> >
> >
> > Any advice appreciated - TIA
> >
> > 73
> >
> > Terry
> >
> > G4AMT
> >
> > ______________________________________________________________
> > Elecraft mailing list
> > Home: http://mailman.qth.net/mailman/listinfo/elecraft
> > Help: http://mailman.qth.net/mmfaq.htm
> > Post: mailto:Elecraft at mailman.qth.net
> >
> > This list hosted by: http://www.qsl.net
> > Please help support this email list: http://www.qsl.net/donate.html
> > Message delivered to rick.nk7i at gmail.com
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to willshattuck at gmail.com
>
More information about the Elecraft
mailing list