[Elecraft] K3 Sub RX Not Working

[Rick NK7I]

Check the menu setting?  Not Inst?

73,
Rick nk7i


On 4/17/2024 8:39 PM, Robie Elms wrote:
> Dave,
>
> Mark sure you do not have the AUX antenna selected for your sub receiver.
> Push and Hold the RX ANT button and change it from Main to AUX or vice
> versa.  This selection is band sensitive.
>
> Robie AJ4F
>
> On Wed, Apr 17, 2024 at 10:07 PM H D Barr <hdbarr at comcast.net> wrote:
>
>> My K3 (non-S) is equipped with the second rx, which I rarely use.  After
>> infrequent use (got a K4) the sub rx seems to have stopped functioning;
>> no signal or noise  can be heard from it. When the "Sub" button is
>> tapped, "No Sub" appears in the display. The main rx and tx functions
>> seem normal.  Before I open up the K3 to see if any cables have come
>> loose, I am searching for more obvious (or easier to check) possible
>> reasons, including operator error.  Any ideas are welcome.
>>
>> Thanks and 73.
>>
>> Dave, K2YG
>>
>> ______________________________________________________________
>> Elecraft mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:Elecraft at mailman.qth.net
>>
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>> Message delivered to ruler55 at gmail.com
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to rick.nk7i at gmail.com