[Elecraft] KAT500 Problem

[Andy Durbin]

"My KAT500 will no longer tune in AUTO mode on 20M and does not change to
prior stored settings in MAN mode.  All other bands work as expected in
both modes.  Any suggestions on where I should look first?"


Use the utility to check that KAT500 has tuned to your 20 m frequency. If it has, then compare the current tuning solution with your stored tuning solutions for that frequency.

Report the results by showing the rig TX frequency, the KAT500 tuned frequency , the current tuning solution, and all solutions listed by DM.  Also state what firmware version is loaded.

Andy, k3wyc