[Elecraft] K3 Randomly Changes Modes

[Gary Memory]

???  “If memory serves me correctly…”

I don’t even know who you are, let alone serve you….

Gary Memory, N7BRJ

😜

On Fri, Oct 27, 2023 at 10:27 Michael Carter via Elecraft <
elecraft at mailman.qth.net> wrote:

> Hi Randy,
>
> If memory serves me correctly, others have reported
> similar gremlins with seemingly random activation
> of front panel controls that were not intended.  The
> remedy was (1) check whether your radio has the
> gold pin connectors on the front panel-to-RF board
> interface, and (2) carefully clean the pins on the male header - not
> by spraying, but by using contact cleaner on a cotton
> swab.  Re-insert the front panel to the RF board.
>
> 73,
> Mike, K8CN
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to radiomemory at gmail.com
>