[Elecraft] K3 and KAT connections without a KPA500

[Jack Brindle]

This is pretty simple, Jim. The AuxIO cable goes from the K3 to the KAT500. Then one of the Antenna outputs of the K3 goes to the RF input of the KAT500.
Of course the antennas connect to the KAT500 then (as they did before).
That is pretty much it.

73,
Jack, W6FB


> On Nov 4, 2023, at 3:03 PM, Jim Cary <jimlcary at gmail.com> wrote:
> 
> I’ve had to take my KPA500 out of service and want to operate just with the K3 and KAT.  I’ve tired different cabling configurations but can’t seem to get the k3 to communicate.  The manuals show all sorts of connections with amps, but not without an amp.
> 
> I know it has to be simple, but sure is beating me!
> 
> Jim
> 
> W2SM
> 
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to jackbrindle at me.com