[Elecraft] Elecraft Digest, Vol 229, Issue 8
Jim Rhodes
jimk0xu at gmail.com
Thu May 25 16:58:24 EDT 2023
I think he is trying to refer to the K4 remote software and K4/0. But that
is just my best guess.
On Thu, May 25, 2023, 14:55 Dave (NK7Z) <dave at nk7z.net> wrote:
> Both what?
>
> 73, and thanks,
> Dave (NK7Z)
> https://www.nk7z.net
> ARRL Volunteer Examiner
> ARRL Technical Specialist, RFI
> ARRL Asst. Director, NW Division, Technical Resources
>
> On 5/25/23 12:33, Thaire Bryant wrote:
> > At Hamvention Eric said this fall for both.
> >
> > 73
> > Thaire W2APF
> >
> >> On May 25, 2023, at 14:46, elecraft-request at mailman.qth.net wrote:
> >>
> >> Send Elecraft mailing list submissions to
> >> elecraft at mailman.qth.net
> >>
> >> To subscribe or unsubscribe via the World Wide Web, visit
> >> http://mailman.qth.net/mailman/listinfo/elecraft
> >> or, via email, send a message with subject or body 'help' to
> >> elecraft-request at mailman.qth.net
> >>
> >> You can reach the person managing the list at
> >> elecraft-owner at mailman.qth.net
> >>
> >> When replying, please edit your Subject line so it is more specific
> >> than "Re: Contents of Elecraft digest..."
> >>
> >>
> >> Today's Topics:
> >>
> >> 1. Re: Power spike early K3 (Victor Rosenthal 4X6GP)
> >> 2. DUAL PB_APF Macro (Jaime Perez-Ullivarri)
> >> 3. Fwd: DUAL PB_APF Macro (ea6nb ea6nb)
> >> 4. KX3 for sale, AJ9Q - SOLD (Burl Borcherding)
> >> 5. Re: K3 - ERR DSE DD0VS (Keith Trinity WE6R)
> >> 6. Re: Elecraft T1 auto tuner question (Dave New, N8SBE)
> >> 7. Re: K2 wanted (W3AB/GEO)
> >> 8. Re: K2 options wanted (W3AB/GEO)
> >> 9. k4D using remotely (Ed Gray W0SD)
> >> 10. Re: k4D using remotely (Lou Laderman)
> >> 11. K3 PF1/2 to set Output Power (Rich)
> >> 12. FW: K3S dual recieve, 144 module, DVR, 100 watt factory built
> >> (Bill Johnson)
> >> 13. KPA1500 for sale (Bill Johnson)
> >> 14. Re: k4D using remotely (Ed Gray W0SD)
> >> 15. Test to see if content appears (Victor Rosenthal 4X6GP)
> >> 16. Re: Test to see if content appears (Julia Tuttle)
> >> 17. Re: Elecraft CW Net Report (Al Lorona)
> >> 18. Re: Elecraft CW Net Report (Victor Rosenthal 4X6GP)
> >> 19. K-Line For Sale (K5EJK)
> >> 20. FS: K3 with 2M / P3 / K-Pod (Mark Adams)
> >> 21. K3 power supply (Istv?n Szab?)
> >> 22. FS: Elecraft cables (w3sb)
> >> 23. I've injured my KAT-100 (Jim KO5V)
> >>
> >>
> >> ----------------------------------------------------------------------
> >>
> >> Message: 1
> >> Date: Tue, 23 May 2023 10:08:11 +0300
> >> From: Victor Rosenthal 4X6GP <k2vco.vic at gmail.com>
> >> To: elecraft at mailman.qth.net
> >> Subject: Re: [Elecraft] Power spike early K3
> >> Message-ID: <ce633941-2277-5eac-1771-6dda00f7f06b at gmail.com>
> >> Content-Type: text/plain; charset="UTF-8"
> >>
> >>
> >>
> >> ------------------------------
> >>
> >> Message: 2
> >> Date: Tue, 23 May 2023 08:40:08 -0000
> >> From: "Jaime Perez-Ullivarri" <ea6nb at infonegocio.com>
> >> To: <elecraft at mailman.qth.net>
> >> Subject: [Elecraft] DUAL PB_APF Macro
> >> Message-ID: <[email protected]>
> >> Content-Type: text/plain; charset="us-ascii"
> >>
> >> Hello,
> >>
> >> I have an old k3 #22xx working quite well, I like both DUAL PB and APF
> but
> >> it is not handy to have to change always at config "DUAL PBT", it is
> >> possible to create a MACRO to change from APF to DUAL PB without the
> config?
> >> I have created a macro for APF but not possible to change to DUAL, they
> both
> >> use the same command: SWH29. Maybe there is another way.
> >>
> >> 73, Jaime EA6NB.
> >>
> >>
> >>
> >>
> >>
> >> ------------------------------
> >>
> >> Message: 3
> >> Date: Tue, 23 May 2023 14:58:52 +0200 (CEST)
> >> From: ea6nb ea6nb <ea6nb at infonegocio.com>
> >> To: "elecraft at mailman.qth.net" <elecraft at mailman.qth.net>
> >> Subject: [Elecraft] Fwd: DUAL PB_APF Macro
> >> Message-ID: <1941890180.307213.1684846732850 at correo.movistar.es>
> >> Content-Type: text/plain; charset=UTF-8
> >>
> >>
> >> Well, I have remembered how to do it without MACROS (not possible) just
> with NORM I/II and saving the filters with NORM. I had that before (15
> years ago) but just disappeared.
> >> 73, Jaime EA6NB. > ---------- Mensaje original ----------
> >>> De: Jaime Perez-Ullivarri <ea6nb at infonegocio.com>
> >>> Para: elecraft at mailman.qth.net
> >>> Fecha: 23/05/2023 10:40
> >>> Asunto: DUAL PB_APF Macro
> >>>
> >>>
> >>>
> >>>
> >>>
> >>> Hello,
> >>>
> >>> I have an old k3 #22xx working quite well, I like both DUAL PB and APF
> but it is not handy to have to change always at config ?DUAL PBT?, it is
> possible to create a MACRO to change from APF to DUAL PB without the
> config? I have created a macro for APF but not possible to change to DUAL,
> they both use the same command: SWH29. Maybe there is another way.
> >>>
> >>> 73, Jaime EA6NB.
> >>>
> >>>
> >>>
> >>
> >>
> >> ------------------------------
> >>
> >> Message: 4
> >> Date: Tue, 23 May 2023 10:36:42 -0400
> >> From: Burl Borcherding <bborch at gmail.com>
> >> To: Elecraft Reflector <elecraft at mailman.qth.net>
> >> Subject: [Elecraft] KX3 for sale, AJ9Q - SOLD
> >> Message-ID: <323177CA-6EBA-4411-BD2A-F7B541C5281C at gmail.com>
> >> Content-Type: text/plain; charset=utf-8
> >>
> >>
> >>
> >>> On May 18, 2023, at 9:16 AM, Burl Borcherding <bborch at gmail.com>
> wrote:
> >>>
> >> SOLD???.
> >>
> >>> ATU, Dual-passband Roofing filters, Hand Mic, Precision Key, Internal
> battery charger,
> >>> Panasonic Eneloop batteries, cable set, SideKX end panels and plastic
> cover
> >>>
> >>> This was my bedroom radio, hence it has never been in the field.
> >>> Excellent condition.
> >>>
> >>> Prefer to sell in the Raleigh Area.
> >>>
> >>> $1550 Cash or Apple Pay
> >>>
> >>> My call?.. at arrl.net
> >>
> >>
> >>
> >> ------------------------------
> >>
> >> Message: 5
> >> Date: Tue, 23 May 2023 09:11:14 -0700
> >> From: Keith Trinity WE6R <keith at elecraft.com>
> >> To: Elecraft at mailman.qth.net, dd0vs at gmx.de
> >> Subject: Re: [Elecraft] K3 - ERR DSE DD0VS
> >> Message-ID: <2435d20e-99d6-a75a-bc74-21ba9ff8d7f8 at elecraft.com>
> >> Content-Type: text/plain; charset=UTF-8; format=flowed
> >>
> >> Hi Harald;
> >> Always post your serial #, it really helps narrow down problems.
> >> If older, the 28pin and 5 pin headers on the RF board going to the front
> >> panel were tin and get oxidized.
> >> Change them to gold.
> >> To confirm this is the problem;
> >> remove the two bottom bolts for the FP, pry gently in the two slots to
> >> move the FP out on the pins a small bit then shove the FP back on.
> >> That will temporarily clear poor connections.
> >> Also search at the groups.io page
> https://groups.io/g/Elecraft-K3/topics
> >> Keith WE6R Elecraft K3/K4 Tech
> >>
> >>
> >>
> >> ------------------------------
> >>
> >> Message: 6
> >> Date: Tue, 23 May 2023 12:20:47 -0400
> >> From: "Dave New, N8SBE" <n8sbe at densbe.com>
> >> To: n7tb at comcast.net
> >> Cc: elecraft at mailman.qth.net
> >> Subject: Re: [Elecraft] Elecraft T1 auto tuner question
> >> Message-ID: <13b4d34b48e8dcbcc37b0d17ab1db27e at densbe.com>
> >> Content-Type: text/plain; charset=US-ASCII; format=flowed
> >>
> >> I use this on all my QRP rigs that can't take a high SWR during tuning
> >> with an external tuner:
> >>
> >> https://qrpguys.com/tuning-indicator
> >>
> >> It's tiny, inexpensive, and keeps the SWR under 1.5:1 while you are
> >> tuning, and has a little slide switch that bypasses the gadget after you
> >> done tuning, so you can get full power out to the antenna.
> >>
> >> Highly recommended (by me, of course :-)
> >>
> >> 73,
> >>
> >> -- Dave, N8SBE
> >>
> >>> On 2023-05-22 14:52, n7tb at comcast.net wrote:
> >>> I have a T1 that I have used for several years. I recently purchased
> >>> a
> >>> QCX-mini, and an SW-3B. I normally use my K2, KX2 or KX3 for portable
> >>> operations, but occasionally I like to use something different for QRP
> >>> CW.
> >>> Both the QCX-mini and the SW-3B require a 2.0 or less SWR. The
> >>> documentation for SW-3B says that operating at any SWR over 2.0 will
> >>> damage
> >>> the radio. The outputs varies with voltage, but usually runs at 4-5
> >>> watts
> >>> with a 12V supply. If I attach the T1 to that rig, and perhaps the
> >>> QCX-mini
> >>> as well, it will require the rig attached to present a constant carrier
> >>> to
> >>> tune. This seems to eliminate using an auto tuner with the SW-3B at a
> >>> minimum in that configuration.
> >>>
> >>>
> >>>
> >>> Can someone tell me how I might get the T1 to tune in the field with
> >>> something other than the rig. If I could trigger it to tune, then I
> >>> could
> >>> attach to the radio after the tune cycle. My plan is to use a
> >>> resonant
> >>> antenna, but that may not always be possible, especially with a three
> >>> band
> >>> rig like the SW-3B.
> >>>
> >>>
> >>>
> >>> Thanks,
> >>>
> >>>
> >>>
> >>> Terry, N7TB
> >>>
> >>>
> >>>
> >>>
> >>>
> >>> ______________________________________________________________
> >>> Elecraft mailing list
> >>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> >>> Help: http://mailman.qth.net/mmfaq.htm
> >>> Post: mailto:Elecraft at mailman.qth.net
> >>>
> >>> This list hosted by: http://www.qsl.net
> >>> Please help support this email list: http://www.qsl.net/donate.html
> >>> Message delivered to n8sbe at densbe.com
> >>
> >>
> >> ------------------------------
> >>
> >> Message: 7
> >> Date: Tue, 23 May 2023 12:14:21 -0500
> >> From: W3AB/GEO <w3ab at w3ab.org>
> >> To: elecraft at mailman.qth.net
> >> Subject: Re: [Elecraft] K2 wanted
> >> Message-ID: <311c37341eabbdcfaf250c3fe3bdd3b9 at w3ab.org>
> >> Content-Type: text/plain; charset=US-ASCII; format=flowed
> >>
> >> Hi all,
> >>
> >> The list provided. I now have a K2.
> >>
> >> Thank you all who responded with offers to sell.
> >>
> >> ---
> >> 73 de W3AB/GEO
> >> AFA9GB
> >>
> >> WA2LSI, KE6RJW, W7B, AAR9AG
> >>
> >>
> >> ------------------------------
> >>
> >> Message: 8
> >> Date: Tue, 23 May 2023 12:16:51 -0500
> >> From: W3AB/GEO <w3ab at w3ab.org>
> >> To: elecraft at mailman.qth.net
> >> Subject: Re: [Elecraft] K2 options wanted
> >> Message-ID: <2bb361a82ab1ac25285d9c330a72fdab at w3ab.org>
> >> Content-Type: text/plain; charset=US-ASCII; format=flowed
> >>
> >> Hi all,
> >>
> >> Now that I have a K2, there are a couple of options I'd like to install.
> >>
> >> If anyone has any of the following, please respond off-list to w3ab at
> >> w3ab.org
> >> Elecraft is backordered.
> >>
> >> KAT2 Automatic Antenna Tuner
> >> KNB2_KNB2 K2 Noise Blanker Option
> >> K160RX 160M OPTION
> >>
> >> ---
> >> 73 de W3AB/GEO
> >> AFA9GB
> >>
> >> WA2LSI, KE6RJW, W7B, AAR9AG
> >>
> >>
> >> ------------------------------
> >>
> >> Message: 9
> >> Date: Tue, 23 May 2023 12:25:22 -0500
> >> From: Ed Gray W0SD <w0sd at triotel.net>
> >> To: elecraft at mailman.qth.net
> >> Subject: [Elecraft] k4D using remotely
> >> Message-ID: <7c88b32a-3515-c1ec-0b89-9412f3f345a4 at triotel.net>
> >> Content-Type: text/plain; charset=UTF-8; format=flowed
> >>
> >> I have a question on using my K4D at my home QTH in SD from AZ as a
> >> snowbird?? If I buy a second K4D can I access/control/use my K4D from AZ
> >> at my home QTH over the internet.? I want to do Digital, CW and SSB.
> >>
> >> I also read about "VK4".? What is the status of this software?
> >>
> >> Thanks,
> >>
> >> Ed W0SD
> >>
> >>
> >> --
> >> This email has been checked for viruses by AVG antivirus software.
> >> www.avg.com
> >>
> >>
> >> ------------------------------
> >>
> >> Message: 10
> >> Date: Tue, 23 May 2023 12:29:01 -0500
> >> From: Lou Laderman <lladerman at icloud.com>
> >> To: Ed Gray W0SD <w0sd at triotel.net>
> >> Cc: elecraft at mailman.qth.net
> >> Subject: Re: [Elecraft] k4D using remotely
> >> Message-ID: <16D56778-4877-47D5-9C45-2519AD3AB36E at icloud.com>
> >> Content-Type: text/plain; charset=utf-8
> >>
> >> Unfortunately not yet. For the remote software, here?s part of a post
> on the K4 group on groups.io from a Q&A with Eric at Dayton:
> >>
> >> Key points from Eric:
> >>
> >>
> >>
> >> IP audio is working, expect summer release (not in beta yet) which
> leads to:
> >>
> >>
> >>
> >> Remote from another K4 or K4/0; early summer (first)
> >>
> >>
> >>
> >> VK4 release, early summer (small fee), he only mentions Windows (any
> flavor, tablet or...) WITH panadapter (working now at the booth)
> >>
> >>
> >>
> >> K4/0 (front panel, p/s, I/o, internet) summer; waiting for critical
> components (parts company bought, handoff stumble, it's gonna happen);
> local audio, local keyer, i/o for logging (etc); it will support an
> internal battery (and charger); will allow plug in internet for wifi
> >>
> >>
> >>
> >> encrypted end to end paths (password key protected) for audio and K4/0
> and K4(D) remote ops data path
> >>
> >> 73, Lou W0FK
> >>
> >> Lou Laderman
> >> (314) 308-4363
> >> Sent from my mobile device
> >>
> >> On May 23, 2023, at 12:26 PM, Ed Gray W0SD via Elecraft <
> elecraft at mailman.qth.net> wrote:
> >>
> >> ?I have a question on using my K4D at my home QTH in SD from AZ as a
> snowbird? If I buy a second K4D can I access/control/use my K4D from AZ at
> my home QTH over the internet. I want to do Digital, CW and SSB.
> >>
> >> I also read about "VK4". What is the status of this software?
> >>
> >> Thanks,
> >>
> >> Ed W0SD
> >>
> >>
> >> --
> >> This email has been checked for viruses by AVG antivirus software.
> >> www.avg.com
> >> ______________________________________________________________
> >> Elecraft mailing list
> >> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> >> Help: http://mailman.qth.net/mmfaq.htm
> >> Post: mailto:Elecraft at mailman.qth.net
> >>
> >> This list hosted by: http://www.qsl.net
> >> Please help support this email list: http://www.qsl.net/donate.html
> >> Message delivered to lladerman at icloud.com
> >>
> >> ------------------------------
> >>
> >> Message: 11
> >> Date: Tue, 23 May 2023 13:36:51 -0400
> >> From: Rich <rwnewbould at comcast.net>
> >> To: Elecraft <elecraft at mailman.qth.net>
> >> Subject: [Elecraft] K3 PF1/2 to set Output Power
> >> Message-ID: <cf979d2f-4c85-78e7-025e-6b6c0cee9396 at comcast.net>
> >> Content-Type: text/plain; charset=UTF-8; format=flowed
> >>
> >> Folks,
> >>
> >> Can anyone give me some direction on how to program the PF1/2 keys to
> >> change power?
> >>
> >> I have no issues programming these keys from the Config Menu but I am
> >> having trouble setting fixed power settings.
> >>
> >> Rich
> >>
> >> K3RWN
> >>
> >>
> >>
> >> ------------------------------
> >>
> >> Message: 12
> >> Date: Tue, 23 May 2023 17:49:01 +0000
> >> From: Bill Johnson <k9yeq at live.com>
> >> To: 'Elecraft' <ELECRAFT at mailman.qth.net>
> >> Subject: [Elecraft] FW: K3S dual recieve, 144 module, DVR, 100 watt
> >> factory built
> >> Message-ID:
> >> <
> SA3PR19MB73210460AC6952A0EAFC44DC9C409 at SA3PR19MB7321.namprd19.prod.outlook.com
> >
> >>
> >> Content-Type: text/plain; charset="us-ascii"
> >>
> >> Have a K4D so this radio was a backup. Am moving so selling.
> >>
> >> Serial #: 11400. In excellent cdx. 100-watt unit with tuner. This has
> the second Receiver, 2MTR module, in fact it has all add-ons except clock.
> Filters : Main receiver: (all are 8 POLE) 13KHZ, 6 KHZ, 2.8 KHZ, 1.8Khz,
> 400 Hz. Sub Receiver: 2.8 KHZ, 1.8 KHZ. DVR recorder, 144 MHZ transverter,
> Diversity. Asking $4K plus shipping and fees. Prefer Zelle payment. Will do
> PayPal, etc. Also, will include Heil microphone, without stand. Please
> reply off list.
> >>
> >> Bill
> >> K9YEQ
> >>
> >>
> >>
> >>
> >>
> >> ------------------------------
> >>
> >> Message: 13
> >> Date: Tue, 23 May 2023 17:53:05 +0000
> >> From: Bill Johnson <k9yeq at live.com>
> >> To: 'Elecraft' <ELECRAFT at mailman.qth.net>
> >> Subject: [Elecraft] KPA1500 for sale
> >> Message-ID:
> >> <
> SA3PR19MB732120B707CB41D7773C7BD39C409 at SA3PR19MB7321.namprd19.prod.outlook.com
> >
> >>
> >> Content-Type: text/plain; charset="us-ascii"
> >>
> >> I am sad to part with this amp but am moving and am cleaning out my
> shack. It is clean. Email me off list and will provide photos and
> additional information. Make a reasonable offer to include shipping. I
> prefer Zelle, we don't have to pay fees. If you wish to use PayPal then
> please include their fee in your offer.
> >>
> >> Bill
> >> K9YEQ
> >>
> >>
> >>
> >> ------------------------------
> >>
> >> Message: 14
> >> Date: Tue, 23 May 2023 13:06:31 -0500
> >> From: Ed Gray W0SD <w0sd at triotel.net>
> >> To: Lou Laderman <lladerman at icloud.com>
> >> Cc: elecraft at mailman.qth.net
> >> Subject: Re: [Elecraft] k4D using remotely
> >> Message-ID: <e7d758e3-1081-5c6a-a3f2-33bfe70f98c6 at triotel.net>
> >> Content-Type: text/plain; charset=UTF-8; format=flowed
> >>
> >> I subscribe to the K4 groups.io?? Thanks so much!
> >>
> >> Ed W0SD
> >>
> >>> On 5/23/2023 12:29 PM, Lou Laderman wrote:
> >>> Unfortunately not yet. For the remote software, here?s part of a post
> >>> on the K4 group on groups.io from a Q&A with Eric at Dayton:
> >>>
> >>> Key points from Eric:
> >>>
> >>>
> >>> IP audio is working, expect summer release (not in beta yet) which
> >>> leads to:
> >>>
> >>>
> >>> Remote from another K4 or K4/0; early summer (first)
> >>>
> >>>
> >>> VK4 release, early summer (small fee), he only mentions Windows (any
> >>> flavor, tablet or...) WITH panadapter (working now at the booth)
> >>>
> >>>
> >>> K4/0 (front panel, p/s, I/o, internet) summer; waiting for critical
> >>> components (parts company bought, handoff stumble, it's gonna happen);
> >>> local audio, local keyer, i/o for logging (etc); it will support an
> >>> internal battery (and charger); will allow plug in internet for wifi
> >>>
> >>>
> >>> encrypted end to end paths (password key protected) for audio and K4/0
> >>> and K4(D) remote ops data path
> >>>
> >>> 73, Lou W0FK
> >>>
> >>> Lou Laderman
> >>> (314) 308-4363
> >>> Sent from my mobile device
> >>>
> >>> On May 23, 2023, at 12:26 PM, Ed Gray W0SD via Elecraft
> >>> <elecraft at mailman.qth.net> wrote:
> >>>
> >>> ?I have a question on using my K4D at my home QTH in SD from AZ as a
> >>> snowbird?? If I buy a second K4D can I access/control/use my K4D from
> >>> AZ at my home QTH over the internet.? I want to do Digital, CW and SSB.
> >>>
> >>> I also read about "VK4".? What is the status of this software?
> >>>
> >>> Thanks,
> >>>
> >>> Ed W0SD
> >>>
> >>>
> >>> --
> >>> This email has been checked for viruses by AVG antivirus software.
> >>> www.avg.com
> >>> ______________________________________________________________
> >>> Elecraft mailing list
> >>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> >>> Help: http://mailman.qth.net/mmfaq.htm
> >>> Post: mailto:Elecraft at mailman.qth.net
> >>>
> >>> This list hosted by: http://www.qsl.net
> >>> Please help support this email list: http://www.qsl.net/donate.html
> >>> Message delivered to lladerman at icloud.com
> >>
> >> ------------------------------
> >>
> >> Message: 15
> >> Date: Wed, 24 May 2023 10:45:34 +0300
> >> From: Victor Rosenthal 4X6GP <k2vco.vic at gmail.com>
> >> To: Elecraft Reflector <elecraft at mailman.qth.net>
> >> Subject: [Elecraft] Test to see if content appears
> >> Message-ID: <f6ab76ab-44f2-6eb8-53d9-64055c36bed4 at gmail.com>
> >> Content-Type: text/plain; charset="UTF-8"
> >>
> >>
> >>
> >> ------------------------------
> >>
> >> Message: 16
> >> Date: Wed, 24 May 2023 03:53:54 -0400
> >> From: Julia Tuttle <julia at juliatuttle.net>
> >> To: Victor Rosenthal 4X6GP <k2vco.vic at gmail.com>
> >> Cc: Elecraft Reflector <elecraft at mailman.qth.net>
> >> Subject: Re: [Elecraft] Test to see if content appears
> >> Message-ID:
> >> <CAEVEBrPM75UxwnY1RaZ9dA14PhmXEGHtphg7SXvv42ae3AG_Vg at mail.gmail.com
> >
> >> Content-Type: text/plain; charset="UTF-8"
> >>
> >> Your email has appeared but the body is empty.
> >>
> >> 73,
> >>
> >> Julie
> >>
> >> On Wed, May 24, 2023, 03:46 Victor Rosenthal 4X6GP <k2vco.vic at gmail.com
> >
> >> wrote:
> >>
> >>>
> >>> ______________________________________________________________
> >>> Elecraft mailing list
> >>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> >>> Help: http://mailman.qth.net/mmfaq.htm
> >>> Post: mailto:Elecraft at mailman.qth.net
> >>>
> >>> This list hosted by: http://www.qsl.net
> >>> Please help support this email list: http://www.qsl.net/donate.html
> >>> Message delivered to julia at juliatuttle.net
> >>>
> >>
> >>
> >> ------------------------------
> >>
> >> Message: 17
> >> Date: Wed, 24 May 2023 12:31:32 +0000 (UTC)
> >> From: Al Lorona <alorona at sbcglobal.net>
> >> To: Elecraft Reflector <elecraft at mailman.qth.net>, kevin
> >> <kevinr at coho.net>
> >> Subject: Re: [Elecraft] Elecraft CW Net Report
> >> Message-ID: <595412678.1687183.1684931492743 at mail.yahoo.com>
> >> Content-Type: text/plain; charset=UTF-8
> >>
> >> Kevin's perseverance is astonishing. Week after week, suffering through
> poor conditions. He never seems to catch a break. So here is THE KD5ONS CW
> NET REPORT I HOPE TO READ BEFORE I DIE.
> >>
> >> "Signals were fantastic. There was no hint of noise nor QSB. At one
> point, I laid the headphones down and could still copy everyone. We had 91
> checkins, including some DX. We all reduced our power to 100 mW. A fox
> nestled at my feet to listen. A bald eagle landed on the window sill while
> I called the net. The birds were even chirping CW. It was a night for the
> ages. See you all next week."
> >>
> >>
> >> Al? W6LX/4
> >>
> >>
> >> ------------------------------
> >>
> >> Message: 18
> >> Date: Wed, 24 May 2023 17:09:05 +0300
> >> From: Victor Rosenthal 4X6GP <k2vco.vic at gmail.com>
> >> To: elecraft at mailman.qth.net
> >> Subject: Re: [Elecraft] Elecraft CW Net Report
> >> Message-ID: <196ddfe0-a7b6-7c0b-3474-89ccc6073e12 at gmail.com>
> >> Content-Type: text/plain; charset=UTF-8; format=flowed
> >>
> >> I've tried to check in. I haven't heard anyone. Some day perhaps.
> >>
> >> 73,
> >> Victor, 4X6GP
> >> Rehovot, Israel
> >> Formerly K2VCO
> >> CWops no. 5
> >> http://www.qsl.net/k2vco/
> >>
> >>> On 24/05/2023 15:31, Al Lorona wrote:
> >>> Kevin's perseverance is astonishing. Week after week, suffering
> through poor conditions. He never seems to catch a break. So here is THE
> KD5ONS CW NET REPORT I HOPE TO READ BEFORE I DIE.
> >>>
> >>> "Signals were fantastic. There was no hint of noise nor QSB. At one
> point, I laid the headphones down and could still copy everyone. We had 91
> checkins, including some DX. We all reduced our power to 100 mW. A fox
> nestled at my feet to listen. A bald eagle landed on the window sill while
> I called the net. The birds were even chirping CW. It was a night for the
> ages. See you all next week."
> >>>
> >>>
> >>> Al? W6LX/4
> >>> ______________________________________________________________
> >>> Elecraft mailing list
> >>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> >>> Help: http://mailman.qth.net/mmfaq.htm
> >>> Post: mailto:Elecraft at mailman.qth.net
> >>>
> >>> This list hosted by: http://www.qsl.net
> >>> Please help support this email list: http://www.qsl.net/donate.html
> >>> Message delivered to k2vco.vic at gmail.com
> >>
> >>
> >> ------------------------------
> >>
> >> Message: 19
> >> Date: Wed, 24 May 2023 15:47:20 -0500
> >> From: K5EJK <K5EJK at Kluft.US>
> >> To: Elecraft Reflector <elecraft at mailman.qth.net>
> >> Subject: [Elecraft] K-Line For Sale
> >> Message-ID: <mailman.56518.1685040166.3600.elecraft at mailman.qth.net>
> >> Content-Type: text/plain; charset="us-ascii"; format=flowed
> >>
> >>
> >>
> >> The system has been sold....
> >>
> >>
> >> --
> >> This email has been checked for viruses by AVG antivirus software.
> >> www.avg.com
> >>
> >>
> >> ------------------------------
> >>
> >> Message: 20
> >> Date: Wed, 24 May 2023 17:31:44 -0400
> >> From: Mark Adams <msadams60 at gmail.com>
> >> To: Elecraft Mailing List <elecraft at mailman.qth.net>
> >> Subject: [Elecraft] FS: K3 with 2M / P3 / K-Pod
> >> Message-ID: <CEB4EE54-7D40-4B27-AD75-FA1CE54B10BF at gmail.com>
> >> Content-Type: text/plain; charset=utf-8
> >>
> >> Hi Gang,
> >>
> >> I am selling the following gear as I revamp my rover and home station.
> This equipment has been the centerpiece of eight September VHF Limited
> Rover wins plus lots of other use. All equipment in excellent condition and
> lots of fresh detailed photos are available upon request.
> >>
> >> K3 Serial Number 7470
> >> KFL3A-2.7K filter
> >> KFL3A-400 filter
> >> KFL3B-FM
> >> KAT3 ATU
> >> KDVR3 digital voice recorder
> >> 100W
> >> KFL3B-FM
> >> KXV3A XVTR Interface and RX Ant
> >> K144XV-100K 2M Module
> >> KUSB Elecraft USB Cable
> >> K*Pod
> >> KSYNTH3A - upgraded synthesizer
> >> KTCX03-1-F High St. Oscillator
> >> P3 Serial Number 3390
> >> Power cable, P3 I/O cable, K3 to P3 serial cable
> >> All Manuals plus Elecraft Macro Programming by KE7X
> >>
> >> This whole package is $2600 including UPS Ground shipping and insurance
> to the lower 48 and PayPal fees. I?m willing to meet within a 200 mile
> drive of Buffalo, NY if you prefer.
> >>
> >> 73,
> >> Mark K2QO
> >> FN03ra
> >>
> >>
> >>
> >>
> >>
> >> ------------------------------
> >>
> >> Message: 21
> >> Date: Thu, 25 May 2023 11:45:37 +0200
> >> From: Istv?n Szab? <nerowine10 at gmail.com>
> >> To: elecraft at mailman.qth.net
> >> Subject: [Elecraft] K3 power supply
> >> Message-ID:
> >> <CAP_thLDCE6ArS-xmVWpVNxC=RJ=fpEXz7eN_6sZ6t8zokbrjrw at mail.gmail.com
> >
> >> Content-Type: text/plain; charset="UTF-8"
> >>
> >> I have been using my silent SPA 8230 power supply for many years. Its
> mains
> >> switch started show contact errors, would like to replace it. As QRP
> Shop
> >> Biz in Germany closed last year need help to find where can I find
> switch
> >> replacement. Could you please help with the switch type and
> manufacturer as
> >> its size quite small?
> >> 73, Istv?n ha4zd
> >>
> >>
> >> ------------------------------
> >>
> >> Message: 22
> >> Date: Thu, 25 May 2023 14:32:04 +0000 (GMT)
> >> From: w3sb <w3sb at ptd.net>
> >> To: Elecraft <Elecraft at mailman.qth.net>
> >> Subject: [Elecraft] FS: Elecraft cables
> >> Message-ID:
> >> <2096840895.93077226.1685025124620.JavaMail.zimbra at ptd.net>
> >> Content-Type: text/plain; charset=ISO-8859-1
> >>
> >>
> >> All,
> >> ?
> >> After 60 years as a ham I've downsized and sold my Elecraft gear
> (sounds of great sobbing and gnashing of teeth). The following cables are
> left-overs and need a good home, offers accepted:
> >> ?
> >> (2) E850368 P3/W3 sensor cables (Elecraft retail $14.95 ea.)
> >> (2) E980296 CJ45 to P3 adapter (KIO3B) (Elecraft retail $18.79 ea.)
> >> (1) KUSB serial adapter cable, USB-to-RS232 (Elecraft retail $42.95)
> >> ?
> >> 73, Monty W3SB
> >> ?
> >> ?
> >>
> >>
> >> ------------------------------
> >>
> >> Message: 23
> >> Date: Thu, 25 May 2023 18:42:37 +0000
> >> From: Jim KO5V <jrf1959 at earthlink.net>
> >> To: elecraft list <elecraft at mailman.qth.net>
> >> Subject: [Elecraft] I've injured my KAT-100
> >> Message-ID: <84664ec3-44ac-c12d-fbe2-b9e3ede423c9 at earthlink.net>
> >> Content-Type: text/plain; charset=utf-8
> >>
> >> Good afternoon,
> >>
> >> After almost 5 years of regular use, I've apparently hurt my
> KPA/KAT-100. The amp and tuner are mounted separately from the K2 in an EC2
> enclosure.
> >>
> >> I forgot to unhook the antenna when I left home on Tuesday. I don't
> think there was any lightning, but it was cloudy, and this time of year
> lightning can come and go quickly.
> >>
> >> Also, the antenna has had an intermittent issue, so maybe I hurt the
> rig while transmitting on Sunday night. The rig's meter acted a bit weird
> while I was transmitting during my last QSO, so I toggled the power, and
> the meter then acted normally. I thought maybe the microprocessor had
> confused itself.
> >>
> >> 1. High-power: I can't tune an antenna on any band. Sometimes I get a
> "HI-REFL: or "PA HOT" error, and sometimes an SWR reading will quickly
> flash on the K2's screen. . I've tried tuning on antennas 1 and 2 using a
> dummy load.
> >>
> >> 2. Low-power: The tuner works into a dummy load on all bands, on both
> antenna ports. The power out measures as expected.
> >>
> >> When I change to low-power, and then select any new band, the "PA HOT"
> error occasionally appears, but clears if I press any button.
> >>
> >> So, I'm guessing it's a diode in the KPA-100. If anyone has any other
> suggestions, insights or criticisms, please let me know.
> >>
> >> Thanks in advance. 73,
> >>
> >> Jim KO5V
> >> Cedar Crest, NM
> >>
> >>
> >>
> >> ------------------------------
> >>
> >> _______________________________________________
> >> Elecraft mailing list
> >> Post to: Elecraft at mailman.qth.net
> >> http://mailman.qth.net/mailman/listinfo/elecraft
> >> You must be a subscriber to post.
> >> Elecraft web page: http://www.elecraft.com
> >>
> >> End of Elecraft Digest, Vol 229, Issue 8
> >> ****************************************
> > ______________________________________________________________
> > Elecraft mailing list
> > Home: http://mailman.qth.net/mailman/listinfo/elecraft
> > Help: http://mailman.qth.net/mmfaq.htm
> > Post: mailto:Elecraft at mailman.qth.net
> >
> > This list hosted by: http://www.qsl.net
> > Please help support this email list: http://www.qsl.net/donate.html
> > Message delivered to dave at nk7z.net
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to jimk0xu at gmail.com
More information about the Elecraft
mailing list