[Elecraft] I've injured my KAT-100

[W3FPR]

Jim,

At any time did you power on the K2 when the temperature was below 0 deg 
C?  That is one way to change the CAL TPA value.

73,
Don W3FPR

On 5/25/2023 3:03 PM, Jim KO5V wrote:
> This problem my be solved.
>
> I was reading some older posts from Don Wilhelm, and found a reference to setting the temperature in the "CAL tpa" menu. I know I set this function to room-temperature when I initially set up the radio. However, I found it was set to 102 degrees C!
>
> So, I reset it to 20C,  and now it all works properly. I'm glad it was simple, but now I wonder why it changed. This is troubling...
>
>