[Elecraft] K2/10

[Christopher Rhoney]

Allan- Your best bet is to contact Dave Van Wallaghen at service at w8fgu.com. (Dave's address is on the Cc line.)
Dave works on legacy Elecraft products for Elecraft, and he provides absolutely expert level service. (Dave is not the only one, but he is who Elecraft referred me to when I called them.)
He took my early K2/10 serial #633 and completely overhauled and aligned it last fall, including bringing it up to the current standard for that rig.
I acquired the K2 last summer and it had several issues (including several partially installed upgrades and missing parts)- Dave fixed all of the issues, and it works perfectly now.

Cheers and 73!

v/r, Chris "Doc" Rhoney/W4VHZ sends
________________________________
From: elecraft-bounces at mailman.qth.net <elecraft-bounces at mailman.qth.net> on behalf of Allan Forster <allanforster1955 at outlook.com>
Sent: Saturday, May 13, 2023 6:16 AM
To: elecraft at mailman.qth.net <elecraft at mailman.qth.net>
Subject: [Elecraft] K2/10

Hi,
I have recently acquired an Elecraft K2/10, it is an early model, serial Nr. 00739.
I am looking for a manual specific to that early model or at least the re-alignment instructions.

The transceiver is in very good condition but appears a little deaf.
I have the following options fitted.
SSB board
Noise blanker
160M/ receive antenna
ATU

Any help would be greatly appreciated

Thanks in advance
Allan G4NNJ
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to rhoneyc at hotmail.com