[Elecraft] Using KIO3B for digital and AFSK RTTY

[Mike Cizek W0VTT]

Hello Pete,

Plug in the USB cable between your K3 and computer.  The computer will (should) recognize the K3 sound card as USB Audio CODEC and install drivers automatically.  In WSJT-X, select USB Audio CODEC as your microphone and speakers.  

You can also do radio control through the same USB port, but if you want to do both at the same time you need a port sharing program like LP Bridge.

---
73,
Mike Cizek WØVTT

-----Original Message-----
From: elecraft-bounces at mailman.qth.net <elecraft-bounces at mailman.qth.net> On Behalf Of Pete Smith N4ZR
Sent: Wednesday, 3 May, 2023 10:10
To: Elecraft List <elecraft at mailman.qth.net>
Subject: [Elecraft] Using KIO3B for digital and AFSK RTTY

Is there somewhere online where I can read about how to use the sound card in my KIO3B?  I am particularly interested in FT8 and AFSK RTTY, and the KIO3B installation instructions are zero help.

--
73, Pete N4ZR
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html Message delivered to mgcizek at gmail.com